Pugody PROJECTOR LAMP
- Perfect compatibility and stability
- Continuous improvement only to provide higher quality bulbs
- Adhere to the pursuit of high quality products
Installation:
-1. Turn off the projector and unplug the power cord.
-2. Let the projector cool for at least an hour. The lamp is extremely hot immediately after use.
-3. Loosen the lamp cover screw. Then slide the lamp cover off.
-4. Loosen the two screws holding the lamp in place.
-5. Hold the lamp as shown and pull it straight out.
Note
- Turn off the power before replacing the lamp.
- Clean the fan and surrounding dust before replacing the lamp to avoid abnormal temperature and cause the
projector to malfunction.
- After replacing the new lamp, clear the lamp usage time.
- After turning off the projector, wait for the cooling to complete before unplugging the power cord.
- Avoid other objects blocking the projector, which will cause abnormal heat dissipation, so as not to affect the life of the lamp and other faults.
Pugodys services
- 30 days refund & 200 days replacement
- Provide technical support for projector bulbs in the first time
- Adhere to the pursuit of high quality services