Feature
●[Premium Quality Rubber] -- Rubber hand pump for siphoning liquid flow quicker and faster. With 2 flexible and durable PVC transparent hoses for visual liquid flow progress, two metal clips for fixing the hose in place, prevent slippage or leakage, and an adjustable hose retainer(color SENT randomly) for keeping the hose standing into the container or receiver, avoid slipping out and permit one hand-free operation.
●[Easy & Safe Siphon Pump] -- Say Good-bye to the dangerous and inefficient mouth suction way. Just connect the hoses to the pumb bulb, the black arrow towards the fluid following direction, put the upper hose into the source tank, a few squeezes of the bulb will get the fluid started following, then put the lower hose into the receiver tank, the fluid will flow automatically (The source fluid must be higher 11 inch or more than the receiver)
●[Efficient Manual Siphon Pump] -- Hand siphon hose pump for gasoline, oil, water, diesel and other common liquids, ideal for emergency transfer. Also suits for fish tank / aquarium tank / small fountain / small air cushion swim pool water transfer. NOT for edible oil, drink water, salt water and any chemical liquids.
●[Multi-Use Manual Transfer Pump] -- Lightweight hand siphon fuel pump is enough for simple daily use, suits for medium and small type equipments without anti-theft filter net, such as brush cutter, lawn mover, hedge trimmer, snow blower, motorcycle, scooter, ATV, lawn tractor etc, NOT for big truck types.
●[Satisfied Service] -- If the product you received from KATUMO store has any quality problems ( man-made damage not included), or parts missing, please email us firstly and in time, related refund or free replacement will be provided.
Description
Gravity Required
- The source fluid should be higher 11 inch or more than the target one (The greater the height difference, the better the effect).
- Put a clip on one end of each hose, then connect the hoses to both end of the pump bulb.
- Secure the end of hose and pump bulb with clip, make it won’t flop out or leak fluid.
- Put the input hose into the source fluid, the black arrow which on the pump bulb points to the exit flow direction. Then squeeze the pump bulb 3 to 4 times.
- When the liquid comes close to the pump bulb, place the outlet hose into the target container. Then the liquid will keep flowing naturally.
- When the fluid level is too low at the bottom of the source container, the pressure will not enough to keep fluid flowing naturally, then need to keep squeezing the pump bulb with hand to finish the pumping job.
No Gravity Required
- There is no height difference required between the source container and target container.
- Put a clip on one end of each hose, then connect the hoses to both end of the pump bulb.
- Secure the junction of hose and pump bulb with clip, make it won’t flop out or leak fluid.
- Put the input hose into the source fluid, the black arrow which on the pump bulb points to the direction of flow. Then squeeze the pump bulb 3 to 4 times.
- When the liquid comes close to the pump bulb, place the outlet hose into the target container.
- Then keep squeezing the pump bulb continually with hands to control the flow rate, till the transfer job done.
Self-check Points When Siphon Pump Cant Work Normally
- The source container which you want to get rid of fluid is placed HIGHER than the target container when using the “Gravity Required” way.
- Both of the source container and the target one are not in a sealed state.
- The indicator arrow which on the pump bulb towards to the exit flow direction, down to the target container.
- Both of the hoses are not knotted or twisted together.
- Exhaust the gas out from the hoses before using.
- Keep the end of the two hoses inside the containers during using, NOT just on the surface.
What You Get
- Pump Bulb x1
- Hose(31 / 47) x2
- Metal Clip x2
- Hose Retainer x1 (Colors Sent Randomly)