[Gold+silver]
[glue+varnish]
[30g+Brush]
[Gold+silver+red copper]
|
|
|
|
---|---|---|---|
Apply adhesiveWipe the surface to be gilded with a soft cloth to ensure that there is no dust or impurities. Use a fine brush to evenly apply the gold leaf adhesive to the surface. Make sure the coating is even and not too thick, to avoid bubbles or dripping |
Apply the gold leafAllow the adhesive to dry on the surface, which usually takes about 15 to 20 minutes.Gently take the gold leaf flakes out of the bag and carefully cover it on the dried surface. Use your fingers or a soft brush to gently press the gold leaf, ensuring that it adheres tightly to the surface. |
Remove excess gold leafUse a dry fine brush to gently brush off any excess gold leaf. Be careful not to touch the already applied gold leaf. |
Apply Top CoatOnce you have applied the foil, let it dry for a few hours. You can then seal it with a clear coat of varnish or sealant to protect the foil and give it a glossy finish. |
Imitation Gold Leaf Kit | Imitation Gold Leaf Flakes | Gold Leaf Sheets | Gilding Adhesive Kit | Gilding Adhesive Varnish Kit | |
---|---|---|---|---|---|
Brand | Kinno | Kinno | Kinno | Kinno | Kinno |
Dealing with Gold foil sheets can be a bit tricky, but with a few tips and tricks, you can use them effectively. Here are some guidelines that can help you: