[33A2]

[33B2]

[33C2]

[33D2]

[33E2]

[33F2]

[33G2]

[33H2]

Heat Transfer Vinyl HTV Heat Tape Provided - Cut out any shape or design & apply! Check out the easy application instructions below! All you need is a plotter or cutter! Works with a home iron or heat press. All Patterns are printed with a large format Roland printer that uses Eco-solvent genuine inks. Iron on Heat Transfer Vinyl - For Any Garment or Fabric - Heat Transfer is printed without the carrier. Heat Transfer Tape or Mask included for application Cut on Pattern Side and DO NOT MIRROR. After weeding excess vinyl, apply Heat Transfer Mask to transfer design off of the backing and place on your garment face up Can be applied with a home iron and/or heat press Cutter Settings may vary based on blade condition and age of machine. Always Perform a test cut! Application Instructions (heat press) Cut material - dont mirror! Weed excess material Mask with Heat Transfer Tape Preheat garment for 2-3 seconds Apply design at 305°F/150°C Use medium pressure for 10-15 seconds Peel carrier hot or cold Cover and reheat for 2-3 seconds CPSIA Certified so it’s perfect for decorating children’s clothing and accessories.