Note: The upgraded version has no blue Positioning ruler, but black removable Positioning ruler
This roller cutter adopts automatic paper-weighting design, self-grinding roller blade and ground blade body, which makes the roller knife automatically sharpen and durable. The cutting size in centimeters and inches is more accurate, convenient, fast, safe and practical. To avoid the phenomenon of paper transfer and paper feeding. The finished product has no burrs, which is an effect that ordinary cutters cannot achieve. No need to sharpen the knife or change the blade regularly, it can cut all kinds of photo paper. Film, hot and cold paper, art paper jam, office paper, thin plastic soft board, rubber soft board, copper po, aluminum, PVC, etc.
Uses:
Rolling cutter is an indispensable tool for cutting all kinds of photographic paper, film, art cardboard, hot and cold crepe paper, thin plastic sheet and thin copper, etc. It is widely used in photo studios, photo museums, big head shops and Related office space.
Parameter:
Model: 24 inch/61cm
Cutting: 61CM/24inch
Discretion: 2mm
Cutting table: 80*31.5cm
The blade is sharp, not only can you cut ten copies of the paper at a time. PVC cards are also easily cut off.
The normal service life of a blade is 1-2 years
Blade replacement steps:
1. When the model is 24 inches or larger, move the knife box (3) to the center of the table, and directly flip the knife box to the outside of the table to make the blade in the visible position, but not too strong, so as not to guide The rod is deformed.
2. Use a micro-slotted screwdriver to remove the top screw (1) from the knife box, and then use a wire cutter to gently pull the fixed shaft (8) down to remove the die (5).
3. Insert the special wrench into the hole of the die and the round nut, and rotate it counterclockwise to remove the blade.
4. When loading the knife box, the plane of the blade is close to the lower blade, and the chamfered surface of the blade should be outward.
This roller cutter adopts automatic paper-weighting design, self-grinding roller blade and ground blade body, which makes the roller knife automatically sharpen and durable.
Note:
1. When cutting, the knife box should be evenly applied along the direction of the guide rod. Do not apply force to other directions.
2. After the work is finished, park the knife box at one end of the guide bar.
3. For your safety, please do not touch the blade with your hand.
4. The blade generally does not need to be replaced, but when the blade is notched or deformed, and the blade is dull and cannot be used, the blade needs to be replaced.
Precautions:
1. When cutting, the knife box should be evenly applied along the direction of the guide rod, and never force in other directions.
2. After the work is finished, please park the knife box at one end of the guide rod.
3, For your safety, please do not touch the blade by hand
4, The blade generally does not need to be replaced, but when the blade is notched or deformed and the knife edge becomes dull and cannot be used, the blade needs to be replaced.
Packing list:
1. Rotary Paper cutting trimmer;
2. Manual;
3. Another blade for free;
4. Magnetic ruler.
|
|
|
|
---|---|---|---|
Knife headKnife head: the whole hobbing cutter is debugged, the knife head is installed with the blade and can be used after receiving the product |
Plastic tablet rulerThis tablet ruler can fix the paper or photo to be cut, making it more convenient for you to cut your pictures. is the perfect cutting tool. |
Product tableProduct table size: the visible cutting width of the cutting table is 30 cm/12 inches More accurate cutting with positioning ruler |
Positioning rulerEquipped with a positioning ruler, the red button on the positioning ruler is used for mobile positioning Positioning ruler with magnet |