Feature

●HIGH QUALITY: Punching mesh heat dissipation hole design combined with aluminum alloy material will not be unusable due to overheating even in high temperature environments.
●Connection terminal is equipped with a security protective cover to avoid electric shock, with dust?proof protection and security isolation protection.
●Reduce the external volume, on the internal configuration, and optimize the components to ensure stable performance and service life.
●WARM TIPS: Before the installation is complete, please carefully check whether the wiring is correct, and prevent incorrect or reverse connections. Re-enable after confirming that it is correct.
●High?quality aluminum alloy material, heat dissipation, resistance, wear resistance and durability.


Description

Specification:
Material: Aluminum Alloy
Model: YY-25-24
Input Voltage: AC 100-264V
Output Voltage: DC 24V
Output Current: 1.05AError Range: ±1%
Pressure Range: ±5%
Power: 25WMax
Waterproof Rating: IP20
Start, Rise, Hold Time: 200ms, 50ms, 20ms
Working Temperature and Humidity: -10-60℃, 20%-90%RH
Storage Temperature and Humidity: -20-80℃, 10%-95%RH
Size: Approx. 79 x 48 x 22mm/3.11 x 1.89 x 0.87in
Purpose: Industrial automation, PLC control cabinet, DC motor,medicalequipment, access control display system, monitoring equipment, light box advertising, LED equipment
How to Use:
Before using the switching power supply product, please read the instruction carefully to check whether the current and voltage of the switching power supply and the load current and voltage meet the requirements for use.
1. When using the switching power supply, be sure to pay attention to the internal high voltage part of the machine, and do not touch the internal components of the machine. Non-professionals should not disassemble the power supply for maintenance, otherwise there is a danger of electric shock. Before use, read the relevant wiring marks
2. When wiring, please turn off the input power.
3. To ensure safe use and reduce interference, please ensure that the ground terminal FG is reliably grounded. (The grounding wire diameter is reasonably selected according to the input voltage and output power)
4. Check whether the mounting screws are in contact with the power supply board components, and measure the insulation resistance between the housing and the input/output to avoid electric shock.
5. Most of the LED switching power supply housing is the heat dissipation part. When installing, increase the contact area between the housing and the case to facilitate heat dissipation and extend the life of the power