Common Problems with Chicken Coop Doors and How to Deal with Them
1.
Q:The chicken coop door cannot rise or rises slowly with sliding teeth and clattering sound.
A:Chicken coop door plate is not flat - check whether the chicken coop door is deformed and uneven (you can manually pull out the door plate, talk about the back of the door plate flat on the glass or tile or desktop and other flat places, and then press the chicken door around to see whether it is flat). If there is deformation and unevenness, you can hold both sides of the chicken door with both hands and push the back of the chicken door to make it flat. After leveling without deformation, it can be loaded and run normally.
2.
Q:Press the chicken door up and down keys manually, the chicken door does not respond.
A.
(1) Press the setup key by mistake - the number will flash, after pressing the setup key, the chicken door will enter the time setting program; wait for 10 seconds and wait until the number does not flash, then you can manually open and close the chicken door.
2) Manually pull out the chicken door and then put it back in - you can remove the battery of the chicken door and then re-install the battery, the program will be reset automatically, and the chicken door can run normally.
3)There is also a situation where the temperature is too low causing the product motor to not operate.
3.
Q:The chicken door cant rise or fall, its stuck.
A.
1) There are foreign objects around the chicken door that hinder the normal operation of the chicken door, you must often pull out the chicken door to remove the foreign objects.
2) The chicken door is seriously deformed, must pull out the chicken door and then flatten it.
4.
Q:The chicken door can not be closed in place, there is a small gap from the bottom edge.
A: This is a normal phenomenon - the product has to protect the chicken is pressed program, there is a slight gap is a normal phenomenon.