Feature

●EWI Mouthpiece Professionally Designed for AKAI EWI’s series, AKAI EWI5000, EWI4000S, or EWISOLO Electronic Wind Instruments.
●Different hardness of biting feeling you can select and colourful choices can perform yourself into Diversity.
●Special design of white soft mouthpiece,it can make vibrato sensor triggered more easily.It’s suitable for player who needs various performance skills.
●It’s only blowing part that can be replaced the original one.The installation is base on the original mouthpiece with simple steps,no need to scrap the whole EWI mouthpiece.
●Silicone blowing part made in medical grade,contains two types of hardness,soft type and original hardness.Freely choose the different blowing part which is suitable for your biting feel and various playing skills.

[Yellow Original Hardness]




[White Soft]




[White Original Hardness]




[Red Original Hardness]




[Black Original Hardness]





Description

geekgeek
white soft white black red yellow
White White Black Red Yellow
Original Hardness ? ? ? ?
Soft ?

Product Display

akaiakai

This product can be applicable to AKAI EWI5000, EWI4000S, EWISOLO, EWIUSB.

Removal

1.Lets prepare an Akai EWI first.1.Lets prepare an Akai EWI first.

2. Find the screw hole behind which is at the top of EWI2. Find the screw hole behind which is at the top of EWI

3.Remove the top part of EWI.3.Remove the top part of EWI.

4. Pry the mouthpiece surrounded by slot inward with a slotted screwdriver. 4. Pry the mouthpiece surrounded by slot inward with a slotted screwdriver.

1.Lets prepare an Akai EWI first.

2. Find the hole behind which is at the top of EWI, Use a cross screwdriver to loosen it 8-10 times.

3.Remove the top part of EWI.

4. Pry the mouthpiece surrounded by slot inward with a slotted screwdriver. (For avoid damaging, sharp tools such as knives or scissors are not recommended)

5.Pry the slot inward until it’s loosened.(as shown by the arrow)5.Pry the slot inward until it’s loosened.(as shown by the arrow)

6.Finally, push down the mouthpiece, and removal is completed.6.Finally, push down the mouthpiece, and removal is completed.

5.Pry the slot inward until it’s loosened.(as shown by the arrow)

6.Finally, push down the mouthpiece, and removal is completed.

Installation

1. Push the mouthpiece through the hole inside the bottom part.1. Push the mouthpiece through the hole inside the bottom part.

2. Pull the mouthpiece by hand after pushing it out.2. Pull the mouthpiece by hand after pushing it out.

3.It’s done when the gap completely match the slot.3.It’s done when the gap completely match the slot.

4. Install the entire mouthpiece and tighten the screw.4. Install the entire mouthpiece and tighten the screw.

1. Push the mouthpiece through the hole inside the bottom part.

2. Pull the mouthpiece by hand after pushing it out.

3.It’s done when the gap completely match the slot.

4. Install the entire mouthpiece and tighten it.

Important information

To report an issue with this product, click here.