Accusize metric 26-piece set radius gauges, 0.5 mm -13.0 mm come with a holder.
Use the gages to measure the radius when it is hard to use micrometres or calipers to do the job, especially when it is difficult to get the measurement across two points. E.g.
When it is hard to use fingers to hold the gauge tp amid the measurement, use the holder to hold the gauge and measure the radius.
Instruction:
|
|
|
---|---|---|
Too smallThe gauge radius is too small. |
Too largeThe gauge radius is too large. |
FitThe gauge radius is suitable. |
![]() |
![]() |
![]() |
![]() |
![]() |
|
---|---|---|---|---|---|
Accusize 3602-5021 Radius Gage Set | Accusize 3602-5026 Radius Gage Set | Accusize 3602-5022 Radius Gage Set | Accusize 3602-5025 Radius Gage Set | Accusize 3602-5023 Radius Gage Set | |
Item # | 3602-5021 | 3602-5026 | 3602-5022 | 3602-5025 | 3602-5023 |
Range | 1/64"-17/64" by 64th and 9/32"-1/2" by 32nds | 0.5mm-13mm by 0.5mm | 9/16"-1" by 16ths | 0.01"-0.5" | 1-1/16" to 1-1/2" by 16ths |
Pieces | 25 | 26 | 8 | 26 | 8 |
With holder or not | ? | ? | ? | ||
Accuracy | 1/64"-7/64": ±0.0008"; 1/8"-15/64": ±0.0010"; 1/4"-3/8": ±0.0012"; 13/32"-1/2": ±0.0014"; | 0.5 - 3mm: +/-0.020mm; 3.5 - 6mm: +/-0.024mm; 6.5 - 10mm: +/-0.029mm; 10.5 - 13mm: +/-0.035mm | 9/16"- 11/16": +/-0.0014"; 3/4" - 1": +/- 0.0017"; | 1~3mm: ±0.020mm; >3~6mm: ±0.024; >6~10mm: ±0.029; >10~18mm: ±0.035; >18~25mm: ±0.042; |