Feature

●【Built-in Chip】Temperature control chip can the water pump from being damaged by dry burning.
●【Accessories】2 nozzles(16mm/19mm) and 4m water tubing.The bigger nozzle, the bigger output; the smaller nozzle, the higher lift comparatively. The water can connect the nozzle for drain water .
●【Bottom Pump】Triple filtration function, mechanical, chemical and biological filtration; naturally circulate water to increase dissolved gas and oxygen content in water; suitable for both freshwater and seawater.
●【Quiet Design】The reliable and durable motor does not make much noise, providing you a quiet environment.
●【High-quality】Made of high-grade material, which is, , to use.


Description

/> 【Accessories】2 nozzles(16mm/19mm) and 4m water tubing. The bigger nozzle, the bigger output; the smaller nozzle, the higher lift comparatively. The water can connect the nozzle for drain water.
【Compact Size】The exquisite size makes the pump easy to hide or disguise in the water.
【Applications】This bottom filter submersible pump can be used for fish tanks, aquarium, fountain, hydroponic systems, cooling and circulation systems, etc.

Specification:
Plug Type: US/EU (Optional)
Power: 35W/55W (Optional)
Vol e: (US Plug), (EU Plug), 50Hz
Noise: 35dB
Grade: IPX8
Max. Rate: 2000L/H (35W),2800L/H (55W)
H-Max.(Lift Height): 2m/6.56ft, 2.6m/8.53ft
Cable Length: Approx. 115cm/ 180cm
Water Outlet Diameter: 16mm/0.63in, 19mm/0.75in
Pump Size: 18 * 18 * 13.5cm /7.09 * 7.09 * 5.31 in
Item Weight: 772g (35W)/ 981g (55W)

Package List:
1 * Water Pump
2 * Nozzles
1 * Water Tubing
4 * Rubber Suction Cups

Notes:
Please check the vol e and power of the pump power before power on, insufficient power and insufficient frequency would affect the rate.
This pump can only be used in fresh water or sea water, and cannot be used in any other liquid.
The pump cant work in water above 35 degrees or below freezing point, otherwise it will be damaged.
DO NOT dry burn the pump for a long time, otherwise it would be damaged.
Please cut off the power before you install/put in/take away the pump from the water; otherwise, the pump cant outlet water due to the air in it.
6. Switch on-off the power repeatedly for several times to eliminate the air in the pump impeller and the .
7. Please it regularly, the pump would make noises or even make the motor short circuit if blocked by debris.