Descriptions:
Convert 0-100% PWM digital signal into analog signal.
The input digital signal can be a 0-100% PWM signal at 3.3V or 5V or 24V levels.
The output analog signal can be 0-10V voltage or 0-5V voltage.
Specifications:
Maximum current: 12mA
Power input voltage: 12-30V
Size: about 5 x 4.5 cm/1.97 x 1.77 inches
Weight: 20 g
Quantity: 1pc
Material: plastic
Usage method:
PWM signal input frequency range: 1KHZ-3KHz
PWM signal input level range:
4.5V to 10V max level, jumpers inserted at 5V. This signal is mainly used for traditional industrial control cards (such as MACH3 board) and 5V CPU interface.
12 to 24 V max to max level, jumper insert 24V. This signal is mainly used in conventional PLC interface.
0-10V analog voltage output:
When the signal input port is not connected, the output port gives 0V. When the module is first powered on, wed better calibrate it: find 50% duty cycle signal, connect to DIN-, DIN+, and match the corresponding jumper amplitude. When the frequency ranges from 1 kHz to 3 kHz, AO and GND are tested by multi-meter.
The instrument should display about 5.4V. We adjust the potentiometer on the converter module to make the multimeter display about 5.4V. After completion, we calibrate and match the pulse signal with this converter module. The module has a 0.1V definition and an output current of 10mA. If the duty cycle is contrary to the voltage, we can choose the PWM output pin STEP LOW/ACTIVE as the MACH3 software.
Notes:
1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
2. Please allow slight measuring deviation due to manual measurement.
Package included:
1 XPWN Converter Module