1.Description :
The clamp is installed and debugged, and the mechanical claw is driven by a single motor.
The clamp is made of stainless steel and weight is : 396 grams.
Easy to control, 5 to 15 volts DC power supply, red negative, black positive. Clamp.On the contrary, the clamp is loosened.
At 12 volts, the clamping force can reach about 16 KG, the clamp can lock itself after power off, and the clamped goods will not loosen.
The maximum driving current of the clamp is about 1.2A. When the clamp is clamped, the self-contained protection device of the motor starts, the power supply is cut off, and the clamping force is maintained. Voltage returns to zero and the power supply is reversed. The clamp is loosened.
2.Size chart:(mm)
M4 Installation hole , installation hole spacing is:48*19.5mm
3.Note:
1).Be sure to be careful when using,or will hurt your hand.