Feature

●【 Product Introduction 】 This product is used for wiring vulcanization molds or resin wiring potting molds, and there will be no contact between water and air and cable connection points. When combined with vulcanized rubber, it can be directly used in deep water, which is a common practice for underwater wiring. It is widely used in fields such as power supply, communication, municipal engineering, water conservancy, landscaping, street lights, tunnels, etc. After vulcanization, the outer diameter is 14mm and the length is 95mm.
●【 Core parameters 】 Applicable cable outer diameter: 5-16mm; Finished product size：100X20mm.
●【 Configuration List 】 Two sets: mold x2 sets of insulation tape x1 small knife x1 small screwdriver x1; Six sets: mold x 6 sets of insulation tape x 3 small knives x 3 small screwdriver x 3.
●【 Note 】 vulcanizate operation time 30 seconds.
●Suitable for all low-voltage cables (1KV), communication cables, and signal cables.


Description

【 Product Introduction 】 This product is used for wiring vulcanization molds or resin wiring potting molds, and there will be no contact between water and air and cable connection points. When combined with vulcanized rubber, it can be directly used in deep water, which is a common practice for underwater wiring. It is widely used in fields such as power supply, communication, municipal engineering, water conservancy, landscaping, street lights, tunnels, etc. After vulcanization, the outer diameter is 14mm and the length is 95mm.