Feature

●[Adjustable Nozzle- Humidification Effect Guarantee] Adjustable nozzles can control the size and density of water mist particles, giving your pet a suitable humidity level. Multiple 360° rotating nozzles will be able to take care of any corner.
●[DIY Your Rainforest System] You can install the reptile humidifier position completely according to your own mind. The 16ft tube, and other accessories allow you to set up the small misting system in any corner.
●[Easy to Add Water - No Tank Limitation] Compared to traditional reptile humidifiers, our humidifier does not have a water tank, and you can use a large bucket as a reservoir. You can store the amount of water that suits your wishes.
●[Intelligent Timing Function - Saving Time and Effort] Through the three buttons on the product, you can freely set the humidified timer. This humidifier saves you from worrying about reptile pets. Depending on the size of the water tank, you can add water to the reservior every two or three days to keep your pet moist.
●[Data Storage-No Need to Repeat Settings] The device is powered by type C USB. Even the power is off, the memory program will automatically remember the previous settings, so you dont need to waste time reset the settings once the power is restored.

[Black-accessories]

[Digital Version]

[LCD Version]

[WiFi Version]

Description


Timer Function Set a timer to intelligently automate your misting the enclosure. The reptile mister is a good choice for your lovely pet.	Fine Mist Help you to create a moist and high humidity environment for plants and pets. Mimic the rain and increase the humidity rapidly.	DIY Project Its not a "plug & play" product. You will enjoy the hand work, and built the system by your own.	Easy to Set-up Set the misting duration and frequency you need, and they work smoothly.


Manual Mode Long press the "set" button, and the maximum misting time is 5 min once at a time. Press any button again and it will stop manual mode.	Duration Setting Set "how long" you need to misting. The maximum misting time is 15 minutes.	Frequency Setting Set "how often" you need to misting. The maximum frequency is 30 days, and the minimum frequency is 10 minutes.

How to disassemble the nozzle?

Press the black O-ring, then pull it out, you can disassemble the nozzle into pieces.

How to ensure you install the tube firmly?

Water will leak if the tube isnt inserted deeply. 0.7 inch deep at least. You can pull it out to see if it is installed firmly.

Plug End Use

The plug needs to be plugged in the end of the last nozzle.

Adjustable Nozzle

The nozzle is 360 degree rotational and the stainless steel nozzle can be adjusted as well. If you feel the misting effect is too strong, you can loosen the screw to make the misting effect gentle.

Timer Function

Fine Mist

DIY Project

Easy to Set-up

Manual Mode

Duration Setting

Frequency Setting

How to disassemble the nozzle?

How to ensure you install the tube firmly?

Plug End Use

Adjustable Nozzle