Feature

●PRACTICALITY: Liquid level detection sensor uses the principle of the difference in weight between two floats when submerged in water and in the air to automatically control the pump pumping or discharging water according to the rise and fall of the water surface
●STABLE and DURABLE PERFORMANCE: Double float water level switch has excellent performance and is easy to use, the water circuit pressure is equal to the atmospheric pressure, the switch life is up to more than 1 million times, very durable
●TWO CIRCUIT DESIGN: Liquid level detection sensor has two circuits A.B. The A end is used for water supply and the B end for pumping. Immersed in water, the centre of gravity is stable and will not float on the water surface, high accuracy
●EASY to INSTALL: Water level controller base comes directly with 3/4" and 1" two-section screw tooth conduit with L-brackets for flush mounting, the best fixing position should be at the top centre of the sink
●SEALED AGAINST MOISTURE: Liquid water level detection sensor module is sealed by the housing and is completely moisture-proof to maintain accurate performance, extend the life of the switch and is highly resistant to corrosion


Description

We are committed to providing various industrial equipment, improving daily life and environment, and focusing on user experience, product quality and the reliability of cutting-edge technology

Specification:
Item Type: Water level controller
Pattern: 220V 7.5A AC
Switch Life : 1 million times or more
Water Channel Pressure: Equal to atmospheric pressure
Temperature Range: 4°C ~ 80°C
Principle: Using the principle of different weights when two float balls are immersed in water and in the air, the pump is automatically controlled to pump water or water according to the lifting of the water surface.

Installation Method:
1. The optimal fixed position of the controller should be at the center of the top of the sink. If you want to fix it on the inner side of the sink, you should take care to avoid the float ball hitting the groove wall.
2. The hanging ball is attached to the controller wire, and the control range is from the center of the upper ball to the center of the lower ball, which can be freely adjusted as needed.

Package List:
1 x Controller

Note:
Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.