Feature

●It can keep min/max records of liquid level
●Easy to Install: The receiver can be put standing on desk or hanging on wall
●Functional Description:This meter monitors tank liquid depth level, and displays on a 10 element LCD bar graph. The transmitter unit is mounted on the top of the tank, using an ultrasonic sensor to measure the water level and a temperature sensor to measure the temperature.The water level and depth of the water tank are clear at a glance. Monitor the outdoor water tank in a comfortable living room up to 100m away.
●Stallation locationYou can hang the receiver unit on a wall or pull out the stand and place it on your kitchen bench top, table or desk. for ultrasonic sensor for auto liquid level meter
●WIDELY MEASURING RANGE: Indoor Temperature Range: 0 60 ; Outdoor Temperature Range: 40 60 ; Temperature Accuracy: 1 . Water Level Measure Rang: 0 15m, Resolution: 0.01m, Accurate: +/ 0.03M


Description

Specification:
Indoor Temperature Range: 0~50℃
Outdoor Temperature Range: -40~60℃
Temperature Accuracy: ±1oC
Water Level Measure Rang: 0~15m
Resolution: 0.01m
Accurate: +/-0.03M
Transmission Frequency: 433MHZ
Transmission Range: 100 meters(300 feet)in open area
Transmission Interval: 30s when level changes or 3 minutes when level does not change
Receiver Battery: 2X AA 1.5V LR3 Alkaline batteries (Not included)
Transmitter Battery: 6X AAA 1.5V LR6 Alkaline or lithium batteries (Not included)
Battery Life: Minimum 12 months for receiver
Minimum 12 months for transmitter
Receiver Size: 108*94*27mm
Transmitter Size: 97*68*152mm
LCD Size: 66*45mm(3.3 inch)
Suitable Liquid Type: All non-corrosive liquid
Open Distance: Approx.100M/328.1ft
Effective Distance : Approx.30M/98.4ft
Package Includes:
1 x Water Level Sensor Transmitter
1 x Indoor Receiver
2 x Screws
(Batteries are NOT included)
Note:
Note that the product is not waterproof.
1. Install the battery in the battery compartment of the transmitter, do not insert the battery compartment, and insert the battery synchronously after the receiver is set up
2. The liquid level indicator has no data, press the tank key, and the data will be displayed.
3. When reset, remove the battery Wait for a while and then turn on the power to eliminate the remaining power in the machine.
4. Whether the red light of the transmitter flashes, the flashing is normal, and vice versa.