[12V]

1. GFRP 3 Blade: The wind has 3 blades(white, red, green) that adopts aerodynamic design and made of GFRP, makes the rotor run smoothly, reliably and quietly.
2. 3 Phase Permanent Magnet: This wind generator adopts three phase AC permanent magnet instrument design, with low torsion, high power tracking intelligent microprocessor, which can effectively regulate the current and voltage.
3. Low Start Up Torsion: Maglev wind generator significantly increases wind energy utilization and annual power generation and with low start up torsion.
4. Double Bearing: Maglev wind generator adopts double bearings, fan movement is more stable, low vibration and low noise. Low initial wind speed and greater windward area.
5. Wide Application: Maglev wind generator vertical axes is ideal for boats, gazebos, cabins or homes, construction, etc.

Spec:
Item Type: 3 Blade Maglev Generator Wind
Material: ABS, Aluminum Alloy, GFRP, Stainless Steel
Rated Power: 100W
Maximum Power: 130W
Start Wind Speed: 1.5m/S
Rated Wind Speed: 10m/S
Safety Wind Speed: 45m/S
Wind Wheel Diameter: Approx. 520mm / 20.5in

How to Use:
Install and use.

packing list:
1 x Wind Main Shaft
3 x Fan Blade
6 x Bracket
2 x Hex Wrench
1 x Instruction Manual
1 x Controller
1 x Iron Plate
1 Pack x Screw Pack Type 1(4 x Large Screws, 4 x Large Nuts, 8 x Large Spacers, 4 x Large Washers)
1 Pack x Screw Package Type 2(13 x Medium Screws, 14 x Medium Spacers, 14 x Medium Washers)
1 Pack x Screw Pack Type 3(27 x Small Screw, 28 x Small Washer)

Note:
There are five wires on the controller, and three green wires of the same color on the controller are connected to three wires on the fan, which can be connected at will. The other two wires are connected in red to the positive end of the battery and in black to the negative end.