Description:
1.Intelligent automatic voltage regulation, after turning on the power switch, turn on the water outlet valve switch, start working, turn off the water outlet valve switch, the water pump automatically cuts off and stops working
2.By installing an overpressure automatic pressure relief device on the pump body, the structure is simple, and there is no need to additionally provide a pressure relief valve on the water pipe, which simplifies the pipeline connection
3.With oil resistance, heat resistance, acid resistance, alkali resistance, corrosion resistance, wear resistance and other properties
4.Small size, small current, high pressure and low noise
5.The motor uses high-quality permanent magnet DC motor with good quality
Specification:
Item Type: Diaphragm Pump
Model: FL3210-80W (1/2in right water outlet)
Material: Engineering Plastic
Drive Mode: Electric
Uses: Boost pump
Pump Shaft Position: Side vertical
Impeller Structure: Closed impeller
Number of Impellers: Multi-level
Impeller Suction Method: Single suction
Principle: Diaphragm pump
Performance: Corrosion resistance
Transmission Medium: Clean water pump
Speed: 4800 (r / m)
Power: 0.08 (KW)
Protection Pressure: 80-120PSI
Heat-resistant Temperature: 60℃
Flowing Rate: 3.5-5 liters / min
Control Type: Intelligent pressure switch
Motor: Permanent magnet DC motor
Voltage: DC12V
Thread Diameter: 1/2 inch = 12.7mm
Package List
1 x Backflow Diaphragm Pump