Feature
●READY IN 30 MINUTES: PRO-FIX Quick Cure Golf Epoxy is engineered for quick golf club repair to get you back on the golf course
●3 CLUB WORK LIFE: PRO-FIX Quick Cure Golf Epoxy has a 5 minute work life to allow time for 3 golf clubs to be repaired or built before curing
●STRONG BOND STRENGTH: PRO-FIX Quick Cure Golf Epoxy is engineered for the high impact of golf shafts/heads and swing speeds up to 125 mph
●USED BY PROS: PRO-FIX Quick Cure Golf Epoxy was designed by professional clubmakers and a chemical engineer making it unlike any other golf glue or golf epoxy on the market
●MADE IN THE USA: Brampton Technology manufactures PRO-FIX Quick Cure Golf Epoxy in the USA with the highest quality standards
[4 Ounce]
[.85 Ounce]
[8 Ounce]
Description
PRO-FIX Quick Cure Golf Epoxy
- 5 minute work life designed to repair / build 3 golf clubs at a time
- Cures in 30 minutes to get you back on the golf course or range to test your new clubs with little delay
- Chemically engineered with impact resistance to create a durable bond that withstands swing speeds over 125 mph
|
|
|
|
|---|---|---|
PRO-FIX Quick Cure 0.85oz Syringe |
PRO-FIX Quick Cure 4oz Kit (2 - 2oz Squeeze Bottles) |
PRO-FIX Quick Cure 8oz Kit (2 - 4oz Squeeze Bottles) |
HOW TO USE PRO-FIX QUICK CURE GOLF EPOXY
|
|
|
|
|---|---|---|
Step 1: Abrade the Tip of the Golf Shaft with a Sanding Belt |
Step 2: Have All Materials Prepped Before Starting |
Step 3: Dispense Equal Volumes of A & B Epoxies |
|
|
|
|
|---|---|---|
Step 4: Thoroughly Mix Epoxy Until Color is Uniform (20-30 seconds) |
Step 5: Apply Epoxy on the Abraded Area of the Golf Shaft |
Step 6: Use a Dowel to Apply Epoxy Inside the Hosel of the Club Head |
|
|
|
|
|---|---|---|
Step 7: Twist Shaft into the Hosel of the Club Head to Coat All Surfaces |
Step 8: Use an Alcohol Wipe to Clean the Excess Epoxy on the Club |
Step 9: Rest the Club Upright for at least 30 Minutes (Check Excess Epoxy to Test the Bond) |
