This 6 x 24in (152 x 610mm), 120VAC SRX silicone rubber heating blanket is rated for use in hazardous areas. The high-limit thermostat is designed to keep the blanket below NEC article 500 T3-rating temperature of 392° F (200° C) with an actual high limit thermostat of 292° F (145° C). Suitable for use on metal surfaces and a large range of surfaces like tanks, hoppers, conveyers, silos, and more. It is moisture, chemical, and radiation resistant with exceptional durability, and comes with an easy-to-apply industrial-strength pressure sensitive adhesive backing. The patented heating element is laminated between two layers of 23mil and two layers of 25mil fiberglass-reinforced silicone rubber, and is grounded to meet NEC 427.23. It has an exposure temperature range of -60° F to 400° F (-51° C to 204° C). The standard power density is 2.5watts/sq in (0.004watts/sq mm). The SRX hazardous area heating blanket has 12in (305mm) long silicone rubber power leads with a bare wire connection and a 0.75in (19mm) conduit fitting. RoHS compliant and FM approved for Class I Division 2 Groups A, B, C, and D, and Class II Division 2 Groups F and G. Requires temperature controller (sold separately). Material: Fiberglass-Reinforced Silicone Rubber With Pressure Sensitive Adhesive Backing. Nominal Silicone Rubber Density Per Layer: 26oz/sq yd (881g/sq m). Silicone Rubber Power Leads: 12in (305mm). Conduit Fitting: 0.75in (19mm). Power Density: 2.5w/sq in (0.004watts/sq mm). Dielectric Strength: Over 2000V. Exposure Temperature Range: -60° F To 400° F (-51° C To 204° C). T-Rating: T3. NEC Temperature: 392° F (200° C). Actual High Limit Thermostat: 292° F (145° C). Dimensions (W x L): 6 x 24in (152 x 610mm). Voltage: 120VAC. Wattage: 360. BriskHeat #: SRX06243601PT3.