[30T Hydraulic Jack | CP-700 Pump]
[10T Hydraulic Jack | CP-180 Pump]
[20T Hydraulic Jack | CP-180 Pump]
Specification:
Color: Black, Yellow, Silver
Material: Steel
Quick Coupling Type (Thread): ZG3/8
Fuel Hose Material: Rubber
Gross Weight: 16.5kg/36.3lbs
Package Size: 64*19*18.5cm/25.1*7.4*7.2inch
Jack Model: RSC-3050
Tonnage: 30T/66138lbs
Travel(Adjustable Height): 50mm/1.9inch
Jack Height: 105mm/4.1inch
Jack Extended Height: 155mm/6.1inch
Jack Diameter: 104mm/4.09inch
Oil Storage Capacity: 210CC
Jack Weight: 5.5kg/12.1lbs
Pump Model: CP-700
Oil Storage Capacity: 700CC
Pump Max. Pressure: 70MPa
Pump Min. Pressure: 7MPa
Pump Weight: 10.5kg/23.1lbs
Package Included:
1* Hydraulic Jack
1* Pump
How to Use:
1. First, connect the quick connector of the manual pump to the jack.
2. Select the position and tighten the hydraulic pump drain screw clockwise.
3. Press the handle up and down.
4. When you can see the coil on the spindle, stop pressing.
5. Loosen the hydraulic pump oil drain screw counterclockwise.
Notes:
1. Please keep the load bearing surface hard and flat and do not exceed the tonnage and rated strok, otherwise, the cylinder will be damaged.
2. It is only applicable to railroad vehicle maintenance, machinery installation, construction project support, etc., not applicable to household cars.
3. The package does not include hydraulic oil, please buy it locally by yourself. Thank you for your understanding.
4. Please stop immediately when you see the stop line.
5. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.