Feature

●?Strong Power: The maximum working pressure of the hydraulic pump can reach 70Mpa, which is more powerful than other similar machines and more convenient to use. And its jack has a tonnage of 20T/ 44092lbs, providing you with stronger power. It not only has a smooth surface, but also has good sealing and no oil leakage.
●?Durable Material: The item is made of steel, which is relatively strong and stable. It is also not easy to damage or rust under proper use and is very durable.Its proper size and weight (7kg/ 15.43lbs) allow it to follow you through various operations.
●?Easy to Use: The manual hydraulic pump has a long ergonomic operating handle for a smoother, more comfortable grip during use. Its thickened insulation feature also provides hand protection for long-term use.
●?Easy to Operate: Its structure is not complicated and does not require complicated installation and operation steps, so you can easily master it. As it is manual, it can continue to work without electricity, so it is very convenient to use.
●?Large Reservoir Capacity: It has a reservoir capacity of 350cc, so you can use it easily without frequent refilling.


Description

Specifications

Name: Manual Hydraulic Pump

Material: Steel

Surface Treatment: Plastic Spraying

Type: Manual

Oil Reserves: 350CC

Maximum Pressure: 70Mpa（700kg/ cm²）

Low-Pressure Speed: 2L/ s (0.44Gal/ s)

High-Pressure Speed: 0.2L/ s (0.044Gal/ s)

Tubing Connector: ZG3/8

Jack Tonnage: 20T/44092lbs

Jack Spindle Diameter: 50mm/1.97in

Jack Stroke: 50mm/1.97in

Jack Extension Height: 155mm/ 6.1in

Pump Body Length: 33cm/ 13in

Pump Body Height: 11cm/ 4.3in

Handle Length: 34cm/ 13.4in

Tube Length: 1m/ 3.3ft

Lifting Jack Size: 8.8*10.5cm/ 3.46*4.13in

Net Weight: 7kg/ 15.43lbs

Package Included

1* Manual Hydraulic Pump

1* Lifting Jack

1* 1m Hose

1* Handle

Notes

1.Please note that there is a pressure-reducing valve on the cylinder head, which should be loosened during use to avoid sealing the hydraulic cylinder.

2.Please note that the bearing surface needs to be hard and flat.

3.When using, please do not bias the load, and stop the operation immediately when you see the stop line.