Feature

●【Steel Wire Joint Sheath&Thickened Plunger】- Its joint is equipped with steel wire protection, which can effectively avoid damage caused by excessive bending of the joint oil pipe so that it can be used for a long time.The thickened design of the plunger increases its wear resistance, which can effectively increase the service life of the manual hydraulic pump.
●【Dust Cover&High-pressure Oil Pipe&Chrome-plated Main Shaft】- The joints of the jack and hydraulic pump are equipped with a dust cover to prevent dust from entering and damaging them when not in use.It adopts a high-pressure oil pipe (1m/ 3.3ft) and attaches a quick joint（ZG3/8）, which makes it convenient and fast for you to use.The main shaft of the jack has been chrome plated to make it smooth and not easy to jam the cylinder, thus extending its service life.
●【Anti-slip Ring&Stop Ring】- The main shaft of the jack is designed with an anti-slip ring so that it has better anti-slip and wear resistance so that you can use it for a long time.A stop ring is designed between the main shaft and the housing to protect the main shaft from breakage and damage under load.It has a reservoir capacity of 350cc, so you can use it easily without frequent refilling.
●【Strong Power】- The maximum working pressure of the hydraulic pump can reach 70Mpa, which is more powerful than other similar machines and more convenient to use. And its jack has a tonnage of 20T/ 44092lbs, providing you with stronger power. It not only has a smooth surface, but also has good sealing and no oil leakage.Its proper size and weight (7kg/ 15.43lbs) allow it to follow you through various operations.
●【Widely Application】- It can be used with hydraulic punches, hydraulic cutting machines, hydraulic cylinders, hydraulic tongs, etc. to perform various operations, such as lifting, bending, straightening, shearing, riveting, assembly, disassembly, etc.


Description

Description

This 20T short jack with a hydraulic pump can convert manual mechanical energy into hydraulic energy. They are made of high-end steel, and corrosion resistant, making the whole machine smooth and easy to clean. In addition, it has a strong anti-strike ability, so it has high strength and is not easy to deform. Its very powerful, so you can use it easily.

How to Use

1. Connect the jack to the quick coupler of the hydraulic pump.

2. Turn the pressure relief valve on the hydraulic pump clockwise.

3. Press the handle up and down.

4. Stop working when the stroke is in place.

5. Turn the relief valve counterclockwise.

 

Specifications

Name: Manual Hydraulic Pump

Model: BSC-20 + CP-180

Color: Orange

Material: Steel

Surface Treatment: Plastic Spraying

Condition: Brand New

Type: Manual

Oil Reserves: 350CC

Maximum Pressure: 70Mpa（700kg/ cm²）

Low-Pressure Speed: 2L/ s (0.44Gal/ s)

High-Pressure Speed: 0.2L/ s (0.044Gal/ s)

Tubing Connector: ZG3/8

Jack Tonnage: 20T/ 44092lbs

Jack Spindle Diameter: 50mm/ 1.97in

Jack Stroke: 50mm/ 1.97in

Jack Extension Height: 155mm/ 6.1in

Pump Body Length: 33cm/ 13in

Pump Body Height: 11cm/ 4.3in

Handle Length: 34cm/ 13.4in

Tube Length: 1m/ 3.3ft

Lifting Jack Size: 8.8*10.5cm/ 3.46*4.13in

Package Size: 37.5*22.5*16cm/ 14.76*8.86*6.3in

Net Weight: 7kg/ 15.43lbs

Gross Weight: 8.5kg/ 18.74lbs

 

Package Included

1* Manual Hydraulic Pump

1* Lifting Jack

1* 1m Hose

1* Handle

Notes

1. Please note that there is a pressure-reducing valve on the cylinder head, which should be loosened during use to avoid sealing the hydraulic cylinder.

2. Please note that the bearing surface needs to be hard and flat.

3. When using, please do not bias the load, and stop the operation immediately when you see the stop line.