How to Use
1.Connect the jack to the quick coupler of the hydraulic pump.
2.Turn the pressure relief valve on the hydraulic pump clockwise.
3.Press the handle up and down.
4.Stop working when the stroke is in place.
5.Turn the relief valve counterclockwise.
Specifications
Name: Manual Hydraulic Pump
Model: BSY-10 + CP-180
Color: Orange
Material: Steel
Surface Treatment: Plastic Spraying
Condition: Brand New
Type: Manual
Oil Reserves: 350CC
Maximum Pressure: 70Mpa(700kg/ cm²)
Low-Pressure Speed: 2L/ s (0.44Gal/ s)
High-Pressure Speed: 0.2L/ s (0.044Gal/ s)
Tubing Connector: ZG3/8
Jack Tonnage: 10T/ 22046lbs
Jack Spindle Diameter: 38mm/ 1.5in
Inner Diameter of Jack Cylinder: 45mm/ 1.77in
Jack Stroke: 11mm/ 0.43in
Jack Extension Height: 64mm/ 2.52in
Pump Body Length: 33cm/ 13in
Pump Body Height: 11cm/ 4.3in
Handle Length: 34cm/ 13.4in
Tube Length: 1m/ 3.3ft
Lifting Jack Size: 8.3*6.5*5cm/ 3.3*2.6*2in
Package Size: 37.5*22.5*16cm/ 14.76*8.86*6.3in
Net Weight: 5kg/ 11.02lbs
Gross Weight: 5.8kg/ 12.79lbs
Package Included
1* Manual Hydraulic Pump
1* Lifting Jack
1* 1m Hose
1* Handle
Notes
1.Please note that there is a pressure-reducing valve on the cylinder head, which should be loosened during use to avoid sealing the hydraulic cylinder.
2.Please note that the bearing surface needs to be hard and flat.
3.When using, please do not bias the load, and stop the operation immediately when you see the stop line.
4.Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.