Feature
●【SELF STICK PREMIUM VINYL WALL BASE】Self-Adhesive Premium Vinyl Wall Base 0.08"(D) x 4"(W) x 20(L) Made of high-quality vinyl, super sticky after peeling off the sticker. Soft, waterproof, durable, non-toxic and odorless adhesive strips, easy to clean, you dont need to buy glue separately.
●【EASY TO USE and INSTALL】Before installing, be sure to clean the surface of the adhered object, if it is greasy and dusty, it will be difficult to paste. Installs in less than 15 minutes with no screws or drilling required. Measure the vinyl sheet and cut to the length you need, peel off the adhesive backing, and stick to a smooth surface. Press back and forth with the spatula to make it firmly attached to the wall
●【WIDELY APPLICABLE】The vinyl floor base sticks to almost any smooth surface (tile, plastic, metal, glass, wood, smooth walls, exterior walls). The product can effectively deal with various scenarios, especially uneven floors or irregular walls, Perfectly covers the gaps between floors and walls. Suitable for garage, gym, living room, bathroom, bedroom, kitchen, RV, nursery, office, hospital, house improvement and more.
●【FLEXIBLE AND DURABLE】This product is made of high-grade vinyl, which is durable and flexible. This material ensures that the product will not deform during long-term use. And the surface of the product has been specially treated to effectively block scratches. Flexible enough to work around the corners without cutting, just use a heat gun or hair dryer to soften the base of the wall. It has a toe design that can effectively cover various blemishes and uneven ground.
●【VINYL WALL BASE】All baseboard molding trim kits come with an easy-peel backing tape that adheres securely to surfaces and is easily removed. Be sure to read our installation instructions for best results. It may be damaged during shipping, we provide free replacement. 12-Month Warranty - Enjoy a completely risk-free purchase with 30-day free returns and replacements.
[4in x 60ft Black]
[4in x 60ft White]
[4in x 20ft Gray]
[4in x 40ft Black]
Description
|
|
|
|
|---|---|---|
FlexibleThis baseboard is very flexible and can be applied in various scenarios. It is a good solution for uneven floors or curved walls. |
Free CuttingThis Wall Base Moulding trim can be cut to any length and shape you need.The installation is also very simple.NO SCREWS or DRILLING. Installation can be done without additional tools. |
Super Strong adhesionOur Vinyl Wall Base come with super sticky self-adhesive tape. It can keep you sticky for a long time. During the installation process, using a hot air blower can achieve the best viscosity effect. |
|
|
|
|
|---|---|---|
Anti-scratchThe surface of this product has been treated with a special process, and has the function of anti-scratch. It can resist attacks from kittens, dogs, rats, etc. |
Easy to cleanIt is very easy to clean. When it is dirty, you can wipe it with water and then dry it with a dry towel. |
Toe designThe design of the toe can well resist dust from entering the seam. And it plays an aesthetic role, can be close to the ground, and is very friendly to uneven ground. |
Please Read In Detail Before Purchasing
Q1:Can this item be painted?
A1:The product itself has been tinted to suit most wall colors. If you are not satisfied with the color of the product itself, you can try painting it with oil-based paint or latex paint.
Q2: Some parts of the product are a bit arched and cannot be pulled into a straight line, what should I do?
A2:Because the wall base is a rolled-up pack, it bends a bit naturally. Roll it in the opposite direction to offset its tension so that it can stick properly.Before installation, please tile the trim for a period of time to ensure the best installation effect. If necessary, use a heat gun or hair dryer to heat the curved part to soften it.
Q3: Is it flexible enough to handle corners or does it need to be cut?
A3:No cutting is required, the wall base fits the wall very well. When encountering outside corners, we recommend that you use a heat gun or hair dryer to soften the wall base, bend it, and then paste it directly. If you want the best results, we recommend thinning the backside of the wall base a bit where it meets the corner. When encountering inside corners, you also need to use a heat gun or hair dryer to soften the wall base, bend it to form a right angle, and make the trim fully fit the wall, finally cut the lower lip to form a 45° angle.
Q4:Is the product quality easy to crack and break?
A4:No, we use high-quality pvc material, which is more flexible and durable than the market.
NOTE:
Powdered wall、Rough cement wall、Uneven wall、Damp wall、Wall covering、Wall Sticker.In the above situation, the viscosity of the glue will decrease slightly. It is recommended to add some glue during the installation process and complete the installation with the help of a hot air blower to achieve the best performance.
WIDELY APPLICABLE
