Feature
●◇ Function --- Use the Prokomon Transmission Fluid Transfer Pump Set for transfer flush and fluid change automatic transmission fluid (ATF), not applicable to volatile products such as gasoline gasoline, diesel
●◇ No Leaks or Splashing --- Pump stroke minimizes leaks; White plastic container allows you to see the level, while the volume control valve at the hose end allows you to shut off dispensing as soon as you approach the fill point; Screw valve allows you to switch between extraction and dispensing
●◇ For Your Vehicle --- 8 vehicle-specific metal adapters, including fill seal automatic transmission systems, for many brands of cars (please refer to the pictures for detailed car brands)
●◇ Easy to Use --- Unscrew tank cap, add ATF fluid to tank, screw cap in place, find proper adapter size, connect to vehicle and dispense hose fittings, use handle to pump tank several strokes (push-pull start operation), use fill valve handle to open fluid line; compressor not included
●◇ Prokomon --- We pursue excellent quality and professional technical support. If you are not satisfied with the product or have any questions, please feel free to tell us. We offer a one year warranty and will refund or replace the product if it has any quality problems.
[PT8160K]
[PT1924K]
Description
Transmission Fluid Pump
- Oil change pump refueling kit for new transmission fluids (excluding drain waste oil) with manual one-way operation. Compatible with most vehicles with specific and universal ATF adapters.
- Transmission fluid is easy to overlook, but in fact it means a lot to the vehicle. When there is poor acceleration, sudden increase in engine speed, or transmission noise, the transmission should be checked and attention should be paid to transmission maintenance.
Transmission Oil Change Pot
- Large 7.5 L capacity, marked with accurate graduations, approximately 70 ml per stroke. Solid round base and tank.
- 1.2 m clear hose ends with fluid control valve and quick coupler.
- Nozzle cap with metal chain that cannot come out of the tank, so you dont have to worry about losing it.
8PCS Transmission Adapters
- Suitable for a wide range of vehicle models. Compatible with Ford, Audi, Volkswagen, BMW, Mercedes-Benz, Porsche, Skoda, Volvo, etc.
- Each adapter has its own detailed fitment model, which is provided for you in the fitment instructions.
- All adapters are packaged in a sturdy and durable blow molded case, which keeps everything organized and clean for storage and future use.
The Difference Between the new and the old
The previous old model was fixed and needed to adjust its position with the screwdriver shown in the picture. The position of the new model shown in the red circle in the figure can be adjusted directly without the need of a screwdriver, which is convenient for use.
Easy to Use
- Start the engine and heat the transmission fluid temperature to normal operating temperature. Use a jack to lift the car up. Unscrew the oil drain plug at the bottom of the engine and drain the old oil by gravity. Prepare a large oil tank to collect the waste oil beforehand.
- Pour the same amount of new oil into the tank, depending on the amount of old oil discharged. Select a correct ATF adapter and insert it into the quick coupler, closing the fluid control valve. Connect the adapter to the fill plug or drain plug.
- Open the valve and press the manual crank up and down to add new ATF fluid to the transmission to the desired level (provide approximately 70 ml per stroke). Check transmission fluid level according to vehicle operating instructions.
- Flush out the reservoir with a clean solvent or engine degreaser and pour out into the waste tank. Let it dry thoroughly.
Note:
- Wear goggles and gloves to avoid skin contact. 2.
- Do not pump oil on limited piping to prevent spills and leaks.
- Operate in a dry, ventilated area away from sources of ignition.