We find the best products from the brands you love and make bundles that have everything you need. We listen to your reviews so we research and manufacture accessories that will answer your needs. Instead of looking for multiple products, just look for Blucoil!
Efficiently get the amplification levels you need with Cloud Microphones Cloudlifter CL-Z. The mic activator utilizes premium electronics to ensure improvement in your mic gain-before-feedback ratio. It harnesses the power of electricity to redefine your microphones sound.
CL-Z only requires 48V phantom power* and converts that into 12dB or 25dB of noise-free gain. The mic activator ensures youre heard loud and clear in the studio or live on stage.
|
|
|
---|---|---|
Get the Best Out of Any MicShape and contour the sound of your mic with the Cloudlifter CL-Zs Vari-Z knob. The mic activator adds a sweepable input impedance (150 Ohm to 15 kOhm) into your signal. You can adjust the Vari-Z knob to find the sweet spot for your microphone. Whether you use a ribbon or dynamic mic, the Cloudlifter can give you a much broader, useable range of tones. |
Exceptional Transparent BoostThe mic activator is equipped with patented Class-A, discrete JFET circuitry. So, it boosts the signal of your low-output ribbon or dynamic mic without adding hisses, crackles, or any coloration. CL-Z converts the +48V phantom power from your preamp or audio interface into as much as 25dB of clean gain. |
Be Heard Loudly, ClearlyClean up your signal before it graces the preamp with the built-in high-pass filter (HPF). The variable HPF ranges from 20Hz to 250Hz. It works in tandem with the variable impedance control, such that the filter frequency decreases as the impedance setting increases. This enables you to be heard above the mix with increased gain before feedback |
|
|
|
---|---|---|
Convenient Plug-and-Play MicCreate better audio recordings with the Audio Technica AT2005USB Dynamic USB/XLR Microphone. The versatile microphone has convenient analog XLR and digital USB connectors. You can record your latest music into your PA system or a podcast into your laptop. Its the ideal partner for home studio singer-songwriters and mobile content creators. |
High Sound Quality for Any ApplicationYou get a high 16bit/48kHz resolution with the AT2005USB mic. It reproduces a natural sound, and its low-mass diaphragm provides a smooth 50Hz-15kHz frequency response. AT2005USB is perfect for home studio recording, voiceover, podcasting, live streaming, gaming, and onstage performance. Plus, the on/off switch works for both analog and USB operation. |
Crisp, Clear Audio ReproductionThe condenser capsule and cardioid polar pattern deliver accurate sound reproduction. It reduces the pickup of ambient sounds in the rear and sides. The microphone effectively captures your unique vocals. You can monitor your recording directly from the mic with the built-in 3.5mm headphone jack. AT2005USB also comes with headphone volume controls at the base. |
|
|
|
---|---|---|
Clean, Balanced Mic SignalsThe Blucoil 10-FT Balanced XLR Cable (3-pin male-to-female) is made with premium Male-to-Female Neutrik-equivalent Zinc Alloy connectors. Blucoils 92% braided shielding maintains consistent signal transfer ? no matter how much you bend the cable. You dont have to worry about signal drops when recording or performing on stage. |
Efficient, Noise-Free Signal TransferEquipped with 24 AWG thick dual conductors (cores), the Blucoil microphone cable ensures zero tonal coloration. Each conductor has 28 oxygen-free copper (OFC) wires, while the outer shielding boasts 84 OFC wiring. Blucoil boasts a 0 dB noise level. The cable blocks and electromagnetic and radio frequency interferences (EMI/RFI). |
Shield Against Plosives and SibilanceAdd the Blucoil Microphone Pop Filter Windscreen into your mic setup for cleaner audio recordings. The 2-layer mesh effectively blocks the air blasted from your mouth. Theres a gap between the layers to disperse any remaining air pressure that passes through the mesh. Its unique design lessens the energy of plosive sounds and prevents hisses or lisps. |
![]() |
![]() |
![]() |
|
---|---|---|---|
Cloudlifter CL-1 | Cloudlifter CL-2 | Cloudlifter CL-Z | |
In-Line Accessory Type | Mic Activator | Mic Activator | Variable Impedance Mic Activator |
Compatible With | Dynamic & Ribbon Microphones | Dynamic & Ribbon Microphones | Dynamic & Ribbon Microphones |
Channels | 1 | 2 | 1 |
Connectors | 1 × XLR Input, 1 × XLR Output | 2 × XLR Inputs, 2 × XLR Outputs | 1 × XLR Input, 1 × XLR Output |
Gain | +25 dB | +25 dB | +12 dB / +25 dB |
Impedance | - | - | 150 Ohm (Variable/Min Z), 15 KOhm (Variable/Max Z) |
Dimensions | 4.5" × 2.0" × 2.0" | 4.5" × 3.8" × 2.0" | 5.4" × 3.4" × 2.6" |
Weight | 0.9 LB | 1.2 LB | 1.2 LB |
What are Blucoil Bundles?
We find the best products from the brands you love and make bundles that have everything you need. We listen to your reviews so we research and manufacture accessories that will answer your needs. Instead of looking for multiple products, just look for Blucoil!