Feature

●[Sensitive Satellite Detector] The digital satellite detector is very sensitive and can detect the weakest signal, strong input signal (strong satellite, large dish) can be easily attenuated for better reading.
●[Bzuzzer and ATT Function] With Buzzer and Attenuation (ATT) function, the signal strength meter will emit a sound on the buzzer (stronger signal higher sound). Equipped with a compass for easier and faster adjustments.
●[Tracking Signal] Connect the satellite detector to your LNB and the receiver to the strength detector TV antenna to track the clearest setting for the satellite you wish to tune to.
●[LCD Display] The signal strength of this digital satellite finder is displayed graphically on the LCD display in the form of a thermometer scale and numbers (0?99).
●[No Batteries] No external power supply or batteries required, powered by your satellite receiver. Mini size and light weight. A satellite probe that can be carried around with you.


Description

Digital Satellite Signal FinderDigital Satellite Signal Finder

DIGITAL SATELLITE DETECTOR

  • The weakest signal is detected
  • Strong input signals (strong satellites, large antennas) are easily attenuated
  • With buzzer and attenuation (ATT) function, signal strength meter will sound on the buzzer (the stronger the signal the louder the sound)
  • Connect the satellite detector to your LNB and the receiver to the TV antenna of the strength detector
  • Signal strength is displayed graphically on the LCD display in the form of a thermometer scale and numbers (0-99)
  • Carry it with you
  • Comes with a compass

Satellite Signal Meter with LCD DisplaySatellite Signal Meter with LCD Display

CONTROLS/FUNCTIONS

  • 1. LNB Connecting Port
  • 2. Receiver Connecting Port
  • 3. Compass
  • 4. Buzzer Control Key
  • 5. LED Backight Control Key
  • 6. ATT Increasing Key

If the incoming signal is too strong.(the thermometer-scales shows max and the signal strength value shows 99)it can easily be attenuated by enabling this "attenuation"function,it reduces the incoming signal to a lower level.There are four step attenuation totally.

  • 7. ATT Reducing Key(The function is contrary to above item)
  • 8. LCD Graphic Display

It can display various measured parameters for the function you selected.It has LED Backlight which user can freely turn on or turn off.

  • 9. Adjustable knob

  • HOW TO CONNECT:
  • 1. Connect a jumper cable from the LNB to the "Satellite"port on the digital SATFINDER.
  • 2. Connect the cable from your satellite receiver to the "Receiver"port on the digital SATFINDER.

Satellite Signal Meter with LCD DisplaySatellite Signal Meter with LCD Display

OPERATION:

  • 1. Switch the satellite receiver on,the digital SATFINDER will turn on by itself.
  • 2. Set your dish to the proper azimuth and elevation settings.(The information should be supplied with your satellite dish )
  • 3. Adjust the knob until the signal strength display at 0%(the critical point).
  • 4. Peak the signal by slowly moving the azimuth and elevation of your dish.The higher values,the better signal.If the digital SATFINDERs reading becomes full scale,you can adjust the "ATT"to reduce the incoming signal to a lower level.Continue to move the dish until you have the highest possible meter reading and the highest possible buzzer pitch.
  • 5. Remove the jumper cable and digital SATFINDER,and reconnect the LNB/LNBF to your receiver.

IMPORTANT NOTES:

  1. To avoid a continuous full scale reading.do not use the digital SATFINDER directly in front of the dish.
  2. When using a LNB with gain higher than 60dB,insert a 5dB attenuator between the LNB/LNBF and the digital SATFINDER. In case no satellite receiver is at hand a 13-18V DC power supply with F-connector can be connected on the "Receiver"side of the digital SATFINDER to power the SATFINDER.

Product information