[50 meters]

Safe and reliable and very flexible, making it more durable.
According to different environmental conditions and plants, ensure proper wiring density, usually 80~120W/m2.

For example: If you use a roll of ZDR-100 heating cable and decide to install 100W/m2. The distance of the cable is 8cm.

Wiring method: Since both sides of the hotbed are easy to dissipate heat, the cables need to be installed in a closer position on both sides of the hotbed. The connector on the heater should be placed outside.

We provide many types of automatic temperature controllers for this cable. This cable should be used with a temperature controller.

describe:

Voltage: 220V

Maximum power: 5000W

This thermostat adopts microcomputer intelligent control, easy to operate, just use the "+" and "-" buttons to set the temperature. Then the thermostat will automatically turn on or off according to the temperature you set.

It is widely used in greenhouse heating, soil heating, fish tank heating, breeding incubator heating, pipeline heating and other fields.

wiring:

Connect the input end of the thermostat to the 220V power supply through the leakage protector. And connect the heating cable or other electrical equipment to the output terminal of the controller. The wiring is complete.

Notice:

1. Terminal screws must be tightened

2. It is not rain and too wet

3. Must be equipped with a leakage protector.

4. The sensor should be placed horizontally, and the power supply should be cut off when people enter.