Encoder introduction:

• Encoder technology: magneto electric
• Single-turn resolution: 13-bit
• Multi-turn technology: Mechanical gear set
• Symbology: binary
• Diagnosis: Memory

Interface introduction:

• Output signal: PROFINET
• Transmission rate: 10/100Mbit
• Interface cycle time: ≥ 2ms
• Linear resolution: 1/4096FS~1/16384FS optional
• Programmable function: Single-turn resolution, signal count direction, IP address filter, IP/TIP
• output driver: Ethernet

Electrical parameters:

• Operating Voltage: 10-30Vdc (5Vdc can be customized)
• Current consumption: < 50mA (24Vdc) no load
• Output signal: PROFINET Industrial Ethernet
• Start Time: < 250ms
• Reverse polarity protection: Yes
• Short circuit protection: Yes
• Repeatability: Less than 2Bit
• IP class: IP65/IP67
• Operating temperature: -40℃~85℃
• Storage temperature: -40℃~85℃
• Temperature: 98% relative humidity, non-condensing state

Mechanical parameters:

• Maximum speed: 6000 rpm
• Spindle load: Axial 40N, Radial 100N
• Spindle material: Stainless steel
• Shell material: Aluminum
• Impact resistance: 1000m/s²(6ms), equal to 100g
• Anti-vibration: 200m/s²(10-2000Hz), equal to 20g
• Allow axial play: ±1.5mm
• Allow radial runout: ±0.2mm
• External structure: 60mm OD, solid shaft, blind hole shaft
• Connection Type: Side outlet M12 connector (rear outlet M8 optional)

Connector Specifications:

Connection 1: M12, female, type D(Side Out Type ) ----- M8, female standard(Back Out Type)

Connection 2: M12, male, type A(Side Out Type ) -------- M8, male standard(Back Out Type)

Connection 3: M12, female, type D(Side Out Type ) ----- M8, female standard(Back Out Type)