Feature

●【Size】 The shaft diameter of AB-phase hollow shaft encoder is about 6 mm/0.23 inches, and the cable length is about 144 mm/5.7 inches. Small size and light weight, more convenient to install and use.
●【Anti-interference】 The C38H8G5-100Z / 200Z / 360Z / 400Z / 500Z / 600Z hollow shaft encoder has higher protection, strong anti-interference, and no pulse blur problem.
●【Speed】 The integrated speed of the photoelectric encoder is 3000-6000 rpm, and the maximum corresponding frequency is 30KHZ. AB 2-phase, more stable working performance.
●【Aluminum + Plastic】 The 5-24V DC encoder is made of high-quality aluminum and plastic materials, hard and durable, and can be used for a long time.
●【Application】 DC encoders are widely used in construction machinery, automated assembly lines, automatic storage and AGV trolleys, office automation, etc.


Description

Specification:
Item Type: Hollow Shaft Encoder
Material: Aluminum + Plastic
Model: Hollow shaft C38H8G5-100Z/200Z/360Z/400Z/500Z/600Z
Shaft: Diameter: Approx. 6mm / 0.2in, 8mm / 0.3in
Working Voltage: 5-24V DC
Comprehensive Speed: 3000-6000 rpm
Maximum Corresponding Frequency: 30KHZ
Number of Phases: AB 2-phase
Cable Length: Approx. 144mm / 5.7in

Package List:
1 x Encoder
3 x Screw
6 x Washer

Note:
1. This product is composed of accuracy components, so please be careful not to drop it
2. When installing, if the eccentricity or deviation angle is too large, it will shorten its service life
3. Do not use in strong impact, vibration, corrosive, large magnetic field, high temperature, high humidity and acidbase environment
4. An error in the number of pulses may be caused when the power is turned on or off. After the power is turned on, there is a 0.5S delay time for use.
5. After the product is fixed, do not pull the cable with a force exceeding 29.4N
6. When there is a highvoltage line or power line nearby, please use a conduit to cover the cable
7. When wiring, pay attention not to shortcircuit the terminals, and make sure that the wiring is correct. Wrong wiring will damage the internal circuit. It is recommended to insulate the unconnected terminals.
8. Shielded wire should be grounded
9. Do not disassemble the product by yourself