[360z]

[500z]

[600z]

[100z]

[400z]

[200z]

Feature:
1. Compact structure, easy installation, small size and light weight, very practically.
2. With higher protection, strong anti?interference, no pulse fuzzing problem, and more durable.
3. The encoder is suitable for accurate working environment, office automation and engineering fields.
4. Made of high?quality materials, strong and durable, has a long service life.
5. Can be used with peace of mind, with strict quality control and quality assurance, high safety factor.


Specification:


Item Type: Hollow Shaft Encoder
Material: Aluminum + Plastic
Model: Hollow shaft C38H8G5-100Z/200Z/360Z/400Z/500Z/600Z
Shaft: Diameter: Approx. 6mm / 0.2in, 8mm / 0.3in
Working Voltage: 5-24V DC
Comprehensive Speed: 3000-6000 rpm
Maximum Corresponding Frequency: 30KHZ
Number of Phases: AB 2-phase
Cable Length: Approx. 144mm / 5.7in




Package List:
1 x Encoder


Note:
1. This product is composed of accuracy components, so please be careful not to drop it
2. When installing, if the eccentricity or deviation angle is too large, it will shorten its service life
3. Do not use in strong impact, vibration, corrosive, large magnetic field, high temperature, high humidity and acid?base environment
4. An error in the number of pulses may be caused when the power is turned on or off. After the power is turned on, there is a 0.5S delay time for use.
5. After the product is fixed, do not pull the cable with a force exceeding 29.4N
6. When there is a high?voltage line or power line nearby, please use a conduit to cover the cable
7. When wiring, pay attention not to short?circuit the terminals, and make sure that the wiring is correct. Wrong wiring will damage the internal circuit. It is recommended to insulate the unconnected terminals.
8. Shielded wire should be grounded
9. Do not disassemble the product by yourself