Feature

●FLEXIBLE COUPLING: Use a flexible coupling for connection, which can effectively avoid direct damage to the encoder.
●SCOPE OF APPLICATION: Suitable for precise working environment, office automation and engineering fields.
●BASIC PARAMETERS: The shaft diameter of the encoder is 6mm or 8mm, the working voltage is 5-24V DC, and the comprehensive speed is 3000-6000 rpm.
●MULTIPLE MODELS: Hollow shaft E38H6G5-100B / 200B / 360B / 400B / 500B / 600B are available:
●HIGH-QUALITY MATERIALS: The encoder uses aluminum + plastic materials, small in size, light in weight, compact in structure and easy to install.

[200B]

Description

Specification:
Item Type: Encoder
Material: Aluminum + Plastic
Model: Hollow shaft E38H6G5-100B/200B/360B/400B/500B/600B
Shaft: Diameter: Approx. 6mm / 0.2in, 8mm / 0.3in
Working Voltage: 5-24V DC
Comprehensive Speed: 3000-6000 rpm
Maximum Corresponding Frequency: 30KHZ
Number of Phases: AB 2-phase
Cable Length: Approx. 144mm / 5.7in
Package List:
1 x Encoder
3 x Screw
6 x Washer
Note:
1. This product is composed of accuracy components, so please be careful not to drop it2. When installing, if the eccentricity or deviation angle is too large, it will shorten its service life3. Do not use in strong impact, vibration, corrosive, large magnetic field, high temperature, high humidity and acidbase environment4. An error in the number of pulses may be caused when the power is turned on or off. After the power is turned on, there is a 0.5S delay time for use.5. After the product is fixed, do not pull the cable with a force exceeding 29.4N6. When there is a highvoltage line or power line nearby, please use a conduit to cover the cable7. When wiring, pay attention not to shortcircuit the terminals, and make sure that the wiring is correct. Wrong wiring will damage the internal circuit. It is recommended to insulate the unconnected terminals.8. Shielded wire should be grounded9. Do not disassemble the product by yourself