OUR BRAND: "SBC Decorative Concrete Training and Products" Has Provided High-End Products Since 1998

PERFECT FOR ?Indoor and Outdoor Concrete Design Work, Use For Texturing Concrete, Plaster, and Stucco

Set Saves You 110.00!

Set Includes:

• #1 SBC Weathered Flagstone
• SBC Classy Granite
• SBC Weathered Granite
• SBC Weathered Slate Granite
• SBC Narrow Italian Slate
• SBC Medium Italian Slate
• SBC Exquisite Barnwood Roller
• SBC Medium Wood Grain Roller
• SBC Costa Rican Granite
• SBC Cobble Stone
• SBC Wall Stone

THE Ultimate Kit For A Profitable Wall Finishing & Decorative Concrete Business

SBC Texture Tools offer the most pristine texture in the industry! Training and Support Is Available For ALL Customers! All You Need To Do Is Call!!!!

SBC Texture Tools Are One-Of-A-Kind. NO COPY CATS AT SBC!

Image Above Was Created Using The #1 SBC Weathered Flagstone Concrete Texture Roller (Included in this set)

ALL SBC CONCRETE TEXTURE ROLLERS IN THIS SET ARE Best Used For Creating Concrete Flooring for Indoors and Out, Wall Designs, Outdoor Seating Areas (As shown in Above Image, Seating Area Around A Pool), Shower Walls, Water Wall Designs, Patios, Driveways, etc.

• EXPERIENCE IS NECESSARY
• PRODUCTION TIPS: IF Covering Walls, Backsplashes, Showers, etc. Mask off surrounding areas & spray Cementitious Material onto the wall using a Professional Sheet Rock Hopper Gun (We highly recommend Marshalltown Hopper Guns, the Red & Blue is our favorite!) Use the hopper gun to get a large amount of material onto the wall in a timely manner. Someone else on the Crew or a Family Member can focus on Troweling the material flat and at a minimum of an 1/8" to 1/4" IS BEST!
• PRO TEXTURING TIP: IF you step back and see any Repetition (especially with the Weathered Flagstone), lightly texture East and West or any direction in addition to the normal North and South texturing method. the more directions you texture, the tighter the pattern will become or helpful in changing the appearance of not being repetitious.

A BIT OF "NEED TO KNOW" When Working With Any Concrete Texture Rollers Or Stamps...

BASIC INSTRUCTIONS ON USE OF SBC TEXTURE TOOLS - (If These Basic Steps Below are followed, This Roller/Stamp Set, as well as most all texture rollers and stamps, will work GREAT, just as they are supposed to and have been proven to work for over 50 years in the industry.

STEPS:

1. MIX THE CONCRETE and apply to surface. {Follow mixing instruction from concrete mix you purchased.}

2. APPLY Release Agent: YOU MUST USE RELEASE AGENT. If you do not, the concrete will stick to the texture roller or stamp. Orderless Mineral Spirits is the best to use. You can purchase mineral spirits at Home Depot, Lowes, Ace Hardware, etc. When using: Apply mineral spirits to the roller or stamp, sometime if needed you can also lightly apply to the concrete surface you are texturing. NOTE: Do NOT use water as a release agent, this will water the concrete down too much and the design will not turn out the way you desire.

3. TEXTURE CONCRETE: Allow Concrete to set up a little, for most mix products, this will take approximately 10 to 15 minutes. (Cooler temperatures will take longer, sometimes an hour or longer.) The concrete should have a clay like firmness. Once your concrete feels like clay and your roller or stamp is sprayed with release agent, spray generous amounts on the clay-like concrete, then roll the roller over the surface or stamp your surface with the stamp.

4. CLEAN CONCRETE BEFORE COLORING: After concrete is completely dry, before you color your design, you need to clean off the mineral spirits. Use a soft bristle broom or micro fiber towels after thoroughly rinsing with a low pressure, pressure washer or a common spray attachment for garden hoses. Pre-soak surface, use broom or micro fiber towels to scrub loose all of the release agent, then rinse very thoroughly. Allow to completely dry before coloring.

5. COLOR PROCESS: Allow Concrete To Completely Dry and Set Up. Once dry and set, you can now begin the coloring process step of your design. We recommend the coloring process is done after the concrete texture design is completed. We do not recommend Pre-Coloring of concrete. 2 Reasons: 1, Unless you are a seasoned Concrete Contractor who has vast experience working with decorative concrete materials, more times than not, the color turns out different than you intended and there’s no way to correct it unless you start over. This will waste a lot of material and cause unnecessary labor. 2, most times, the color does not mix all the way through and when you pour and trowel down the concrete, sometimes you end up with blotches of missing color. Again, the only way to fix this is to start over. THE BEST Coloring Method is to color your concrete after the concrete is dry and set up. We offer video training and are very happy to share this with you. Just reach out, if you need additional help!

6. LAST STEP: Sealing. NO MATTER WHAT, you will need to seal your concrete project if you want it to last long and be easy to maintain. Different products require different sealer. Also, depending on whether your concrete product is for outdoor use or inside use, will factor in on what release agent you should use. If Outdoors, (Driveways, Patios, Pool Decks, Walk Ways, Boulderscapes, Landscape Designs, etc.) you cannot use Epoxy Sealers, they will fade and turn yellow within time, no matter what a sales person tell you. Outdoor sealers should be Solvent Based Sealer Products. If Indoors, (Countertops, Coffee Tables, Concrete Sinks, Concrete Flooring, etc.) Epoxy Sealers are perfect to use and look the best.

As a reminder....IF YOU NEED ADDITIONAL HELP, we are very happy to help and make sure your project is a Success!