Feature

●【 Designed as Water Thermostat not Water Heater 】Our pool heater designed specifically for the hot tub, the thermostat is installed in the pipeline jacuzzi. When adding hot water bath, start the pump, the thermostat automatically heat insulation work, so the water temperature bath maintained at 39 °C Celsius, give your Jacuzzi to create a more comfortable environment .
●【 Intelligent Self-test System 】Electric pool heater Can comprehensively monitor the operating status of the system, and quickly make corresponding judgments and displays, so as to avoid the occurrence of faults such as dry water in the absence of water, and pool heaters is easier for the user or maintenance personnel to judge and maintain the fault.
●【 Automatic Outdoor Water Heater】 Automatic heat pump pool heater will first reach the preset temperature, then stop working until the temperature dropped a few degrees, the thermostat automatically turns on.
●【 Automatic Power Off, Safe and Reliable 】 Ultra-high temperature protection switch and reset button of the Water Heater Thermostat.Ultra-high temperature (over 49 °C), ultra-high temperature switch will automatically trip (power off).The swimming pool heater can be maintained within a temperature not exceeding 40 °C (104 °F) range.
●【 Easy to Install and Disassemble 】Water heater for pool is good interior circulation, not dross, easy removal. Input voltage:220V. Power:3KW. 1 Year Warranty!


Description

Our thermostat can be maintained within a temperature not exceeding 40 °C (104 °F) range. If cold water is started, will be 6 ~ 8 °C / h elevated temperatures .The thermostat can be maintained within a temperature not.
Automatic thermostat : thermostat will first reach the preset temperature, then stop working until the temperature dropped a few degrees, the thermostat automatically turns on.
Specifications:
Input voltage: 220V -240V.
Size: 18 * 12.5 * 12.5CM/7.08*4.92*4.92IN.
Power: 3KW.
Current:13.6A.
Frequency: 50/60Hz.
Phase parameters: Single phase.
Intake: 50mm, outlet: about 32mm.
Package Included:
1 x Water Heating Thermostat .
2 x Interface .
1 x User Manual.
How to choose pool heater?
1.One cubic meter of water required thermostat 1.5kw-3kw.
2.If swimming pool indoor, and ambient temperature is high, the parameter multiplied 1.5kw.
3.If the pool is outdoor, or theambient temperature relatively low , the parameter multiplied 3kw.
4.If unable to determine,the parameter multiplied 2kw.
Pls Note:
1. Thermostat outlet to the bath tub in the middle of the pipe or valve or check valve can not be installed.
2.This item needs to be wired up to a new plug. Please ensure water pressure is enough to make it work .
3.If the power of pump is 500watt better. The water of pool not exceeding 3m³.