Specifications:
Condition: 100% Brand New
Material: Plastic + Metal
Color: Gray White
Size: approx. 18 x 11.6 x 3.1cm / 7.1" x 4.6" x 1.2"
Power Supply: 1 x 1.5V AA Batteries(not included)
Recommended chlorine level for pools and spas: 1.2 ~ 1.7ppm
Recommended pH level for pools and spas: 7.2 ~ 7.8pH
Package Weight: 220g
Package Included:
1 x Water Quality Tester
Attention:
1. Please dont immerse the probe in any liquid other than pool or spa water.
2. Please rotate the switch to close position when not in use.
3. Please store the tester in cool and dry place.
Usage:
Before you use this tester for the first time, you must adjust it to match your swimming pool or spa water with the following sequence:
1. Test your pool or spa water using a conventional liquid test kit
2. Record the chlorine reading level as you will need.
3. No adjustment is required for pH.
Testing Chlorine Level:
Recommended chlorine level for pools and spas: 1.2 ~ 1.7ppm
1. Position the needle to your "adjustment point".
2. Holding the tester in one hand and the probes in the other, insert the probes into the water up to the black band. Wait until the needle rests for a better chlorine reading.
3. Leave the probes in the water.
Test pH Level:
Recommended pH level for pools and spas: 7.2 ~ 7.8
1. With the probes still in the water, turn the wheel all the way to "pH" until it clicks(battery must off for pH reading).
2. Wait until the needle rests on the pH reading.
3. Gently dry probes and insert into the holder on the side of the tester for storage.