Item Type: Water Tank Detector
Application: Universal
Material: Iron + Rubber
Pipe Length: Approx. 50cm/19.7in
Pipe Outside Diameter: Approx. 11.6mm/0.5in
Pipe Diameter: Approx. 8.3mm/0.3in
Method and Note:
1. First close the valve of the tool, and then connect the air pipe of the workshop.
2. Pull up the black knob and turn it to adjust the pressure to 0.1 pressure, and then connect the quick connector to the vent pipe of the vehicles water tank cover or the auxiliary water tank water pipe.
3. Open the valve, look at the watch at this time, it will lower, and again increase the air pressure to 0.1 or 0.16 (normal water tank 0.1 water tank 0.16).
4. Raise the vehicle and repair it wherever there is water leakage.
5. Note: Be sure to adjust the pressure before connecting the vehicle. Because the pressure is adjusted too high, the heating water tank in the instrument panel will burst and cause damage to the vehicle.
Package List:
1 x Water Tank Detector
1 x Manual