Feature
●【Strong Wind Power】With 750W of power and 580m³/h of flow, this blower can blow a very strong wind. The strong wind can quickly inflate your inflatable products and save your time.
●【Great Durability】This blower shell is made of flame-retardant and thickened PP material, which is very shock-resistant and impact-resistant. It can well protect the motor inside so that your blower can be used for a long time.
●【Low Noise】We have done a lot of tests in the production of this blower and strive to minimize the noise of the impeller, wind drum and air friction. So this blower does not produce a lot of noise to disturb others when you use it.
●【Fast Heat Dissipation】The holes on the shell not only deliver air for the blower but also help it quickly dissipate heat, extending the life of the machine.
●【Energy-saving】This blower is equipped with an energy-saving motor, so using it will not waste much of your electricity and can save you money on your electric bill.
[1HP 750W]
[1.5HP 950W]
Description
Application
It is suitable for various inflatable products such as balloons, inflatable boats, inflatable bathtubs, inflatable bouncers, inflatable castles, inflatable advertisements, inflatable decorations, outdoor bounce houses, water slides, obstacle courses, air sofas and other suitable inflatable bouncers.
Specification
Color: Yellow
Material: PP
Voltage: 110V
Power: 750W (1HP)
Noise: 60-75 dB
Frequency: 60Hz
Pressure: 2000Pa
Flow: 580m³/h
Cord Length: 2M/ 6.6ft
Certification: UL/ CUL/ CE
Plug Standard: US
Gross Weight: 7.5kg/ 16.5lbs
Net Weight: 7kg/ 15.4lbs
Package Size: 44* 40.5* 27cm/ 17.32* 15.94* 10.63inch
Product Size: 38.6* 24.6* 40.3cm/ 15.2* 9.69* 15.87inch
How to Use
Step 1: Tie the inflatable product connector to the blower outlet.
Step 2: Connect to the power supply and turn on the blower power switch.
Package Included
1 * 750W Blower
4 * Ground Nails
Notes
1.Although the blower is shock-resistant, violent collision and vibration are also strictly prohibited during use or transportation.
2.Acid, alkali, oil, water, etc. are strictly prohibited to be immersed in the blower. Please pay attention to the moisture and place it in a dry location where it is ventilated and free of acid, alkali and all corrosive gases.
3.The air inlet should not be blocked during use, please prevent sharp and hard debris, and ropes from being inhaled into the blower.
4.Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.