Feature

●[JACK CAPACITY-3.0T/ 6600LB]- Working Capacity can reach up to 3.0T (6600lb) as a jack. ?Note: Never use it on a sloped ground, be sure to use it on a flat road and place in the direction parallel to the car.
●[LIFTING HEIGHT RANGE: 155MM-450MM]- Lifting height range is from 155mm to 450mm. Lift the car in less than a minute by the jack, change a tire quickly. Non-slip cross groove design. Freely adjustable height.
●[EASY TO OPERATE]- The panel is easy to understand and operate. First adjust the mode to the lift mode, then press the button (up), you can easily ascend it. And the pressure gauge makes it convenient for you to check the inflation pressure while using the inflatable model.
●[MULTIFUNCTION & ELECTRIC WRENCH]- It is able to function as a car jack, an air pump and a LED flashlight.So it can meet multiple demands.
●[COMPLETE ACCESSORY KIT]- Including car electric jack; impact wrench; sockets; safety hammer; plastic case; 3.5m power cable; Battery Clamp with Wire; Fuse ; Inflate Head ; Hex Key;Inflate Needle; Pair of Gloves; User Manual. Very portable and easy to use.??Pay attention to the positive and negative poles of the cable connectors on both ends, if reversely connected, there will be screw rod bending, abnormal sound and button failure.


Description

Specifications:
Electric Car Jack
Input Voltage: DC 12V
Rated Power: 150W
Max. Current: 15A
Fuse: 15A
Max. Loading Car Weight: 3 Ton
Lifting Height Range: 155-450mm
Working Temperature: -25-50℃

Inflator Pump
Input Voltage: DC 12V
Rated Power: 120W
Inflating Speed: 35L/ min
Max. Current: 10A
Pressure: 10BAR/150PSI
Length of Air Hose: 600mm
Cylinder Diameter: 25mm

Impact wrench
Working voltage: cigarette lighter
Power supply: DC 12V or Vehicle battery power supply
Rated Power: 85W
Working Current: ＜12A
Max Torque: 350N.M
Transmission shaft square head size: 12.5mm
Sockets: 17/19mm, 21/23mm
Package weight: approx. 8.9 kg

Package Contents:
1 x Car Electric Jack
1 x Impact Wrench
1 x Safety Hammer
1 x 3.5m Power Cable
1 x Battery Clamp with Wire
2 x Sockets (17/19mm, 21/23mm)
4 x Fuses
2 x Inflate Head
1 x Inflate Needle
1 x Hex Key
1 x Pair of Gloves
2 x User Manual
1 x Plastic Case

How to replace the broken fuse?
Step 1：Unscrew the metal part at the front of the cigarette lighter plug anticlockwise
Step 2: Take out the broken fuse and replace it with a spare fuse
Step 3: Screw the metal part clockwise