Alternator Magneto Stator 68V-81410-00 Fits For Yamaha Outboard 115HP, For Yamaha F115 2000-2013, For Yamaha FL115A 2000-2013
Stator Generator REPLACEMENT PART NUMBER: 68V-81410-00 68V-81460-00
Package Included:
1x Generator Stator Coil
Features:
Direct replacement to your original unit
Plug-and-play, direct fit, easy installation.
Highest grade lamination materials.
Highest grade copper windings, resistant to 200 degrees Celsius.
Connector included.
All products shipped are tested.
Package Included:
1x Generator Stator Coil
|
|
|
---|---|---|
DimensionsInterior diameter : 58mm / 2.28 inches Exterior diameter : 129.9mm / 5.12 inches Poles Thickness : 29.3mm / 1.15 inches Poles Width : 17.6mm / 0.69 inches |
REPLACEMENT PART NUMBER68V-81410-00 68V-81460-00 |
Other SpecificationsNumber of wires: 5 Number of pins: 7 Number of plugs: 3 Number of fixation holes: 3(+1) Number of poles: 18 |
Fits for Yamaha Outboard 115HP
Fits for Yamaha F115 2000-2013
Fits for Yamaha FL115A 2000-2013
NOTICE:
Before installing your new stator
Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier.
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation.
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.