Magneto Generator Engine Stator Coil For Daytona 600 650 / Scrambler 865 / Speedmaster 800 865 2003-2007
SPECIFICATIONS
Quanity: 1PC
Type: Generator Stator Coil
Replacement Part Number:T1300148 / T1300818
Dimensions :
Interior diameter : 54mm / 2.12"
Exterior diameter : 115mm / 4.51"
Thickness : 14mm / 0.55"
Other specifications :
Number of wires: 3
Number of pins: 3
Number of plugs: 1
Number of fixation holes: 6(+1)
Fixation holes length: 27mm / 1.05"
FITMENT:
For Daytona 600 2003-2004
For Daytona 650 2005
For Speed Four 600 2002-2006
For TT600 2000-2003
For Speedmaster 865 2006-2007
For Speedmaster 800 2003-2004
For Scrambler 865 2006-2007
PACKAGE INCLUDED:
1x Generator Stator Coil
NOTICE:
Before installing your new stator
Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier.
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation.
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.