Linked suspension can be tricky to set up, but with our 3 hole upper link bracket, you’re able to easily set up your suspension with some adjustability. These brackets are great for doing three-link or four-link suspensions. The brackets weld directly onto the frame. Cut from 1/4″ HRPO steel and bent on a CNC brake to add shape and strength. These brackets are designed to withstand difficult terrain and use. The solid compact design provides protection to the rod end. They are designed to work with a 4 inch or taller flat surface. One end of the bracket also has added material to sit under or above the frame to add more welding surface and strength. The added material can easily be cut off if mounting in the middle of a large flat surface if needed. The 3 hole design, allows you more options for suspension tuning. By moving the link mounting location up or down you can change your anti-squat geometry for how your rig handles giving you more tunability for different terrains and driving styles. Currently, we only offer them in a 2″ mounting width with a 5/8″ hole and a 2.625″ width with a 3/4″ hole. Additionally, you’re able to choose between 0°, 10°, and 20°. As a result, you’re able to mount your suspension joints in a neutral position. Allowing you to maximize your travel. 2″ mounting width option Hole spacing is .875″ up or down Bracket is 4.25″ tall overall 5/8″ bolt holes 2.625″ mounting width option Hole spacing is 1.25″ up or down Bracket is 6″ tall overall 3/4″ bolt holes While working on your linked suspension you may find you’ll also need lower axle link mounts. The Lower Link Bracket with Shock Mount makes tackling that desire a breeze. Together with our selection of rod ends and fabrication link tabs a linked suspension should come together easily.