All our products are new and have not been used, they are sent in sealed boxes.
The Steering Bracket is a component that connects the Steering Column and related components to the vehicle chassis and takes the steering loads. In the original design, the Steering Bracket was quite heavy and unwieldy, while also having a traditional mechanical structure
|
|
|
|
---|---|---|---|
Step 1Remove the bolts from the rear of the pump and mount the lower brackets that came with your kit to the water pump. Due to production variations in pumps, the number of washers may change |
Step 2Secure the pump to the lower brackets, and mount the upper bracket on the water pump. Check the distance between the upper mounting bracket and the power steering pump. |
Step 3The distance should be approximately the thickness of 1 spacer washer. If this distance is too great it may be necessary to move the pump forward |
Step 4Mount power steering pulley to pump shaft. Check power steering to crank pulley alignment. Install belt and adjust belt tension by pulling up on power steering pump. |