Thank you for considering Sykik TPMS for Trikes, Spiders, CanAms and other 3 wheel vehicles. This system is designed to provide real-time monitoring of tire pressure and temperature. This wireless system is easy to instal in minutes. Just set the range of tire pressures and maximum temperature and you are set to go. Or just use the default settings for your parameters. In case of a sudden drop in tire pressure, even still above the minimum setting, you will be alerted to take the necessary precautions. Keeping your tire pressure in the correct range not only can saves lives will saves fuel, and extend tire life.
Fully Waterproof 1.5" monitor can be installed in a variety of locations. The package includes a handlebar mount, for round bars. The unit interface is a standard 1/4" screw hole. make it easy to be used with a variety of mounts sold in the market. the manufacturer also can provide a flat mount, to instal on flat surfaces. The monitor is powered by a built-in rechargeable battery with a long life of 6-9 months. Once the battery needs to be charged, you will be alerted. USB cord to charge the battery is also included in the box. The display is a bright multi-color screen, clearly visible in day time or night. If your tire experience a sudden air loss, or air leak, the display flashed in red and blue, catching your attention with constant beeping. This alert is also repeated if your tire pressure goes beyond the minimum and maximum pressure or the temperature you have selected for each tire. Size: 2"x2", 1" deep.
Sensors are fully waterproof wireless broadcasters to send pressure and temperature of the tire to the monitor. The internal sensors not only provide a more accurate reading but is also easier to add air to your tires in case of lower pressure. Since they replace your tire stems, these are the perfect replacement for your rubber stems. The sensors each include 3 small watch battery (different for each model) to last about 3 years. the new advanced 90-degree angle of the stems, provides easy access to add air or such.
Default settings: High Pressure 3.1 BAR or 45 PSI
Low Pressure 1.9 BAR or 27 PSI
High Temperatur 66 C or 150 F
To change the pressure unit:
Turn on the display
Press and hold SET to access the settings menu
Press A to reach BAR PSI
Press SET to choose the desired unit of pressure
Press and hold SET to save and exit
To change the temperature unit
Turn on the display
Press and hold SET to access the settings menu
Press A to reach C F
Press SET to choose the desired unit of temperature
Press and hold SET to save and exit
In the box you will find the following:
Waterproof main unit with multi-color display
3 internal tire sensors
Handlebar mount
USB charging cord
Instruction manual