Feature

●Scope of application: This kind of automotive clutch centering tool is usually used in most cars. To ensure that you have purchased the correct product, please read the product description or picture size carefully before placing an order (sleeve length: about 5.48 cm/2.2 inches; pillar length: about 12.96 cm/5.1 inches.) for Single Plate Automotive.
●Aluminum alloy material: The clutch centering tool is made of high-quality aluminum alloy material, which is scratch-resistant and wear-resistant, strong, high-strength, high-hardness, not easy to damage, and has the best durability for Replacement Clutch Alignment.
●Easy to carry: The clutch alignment tool is compact in design, small and exquisite, and can be easily put into your suitcase or tool bag, easy to store and carry, and is not restricted by time and place. for Corrector Repair Auto.
●Product function: Use the centering tool in this direction to quickly and easily complete the centering of the clutch and pressure plate before installation. In addition, the clutch alignment tool allows manual maintenance (centralized) and application of clutch plates to pressure plates of cars and trucks during installation for Hand Tools.
●Operation method: The Single Plate Alignment Tool operation is very simple, which perfectly solves your problem, saves your time and avoids unnecessary losses. The records of each product production quality control link are traceable, and unqualified parts are never allowed to enter the next process, so every product that leaves the factory is 100% qualified.


Description

Specification:
Item Type: Clutch Alignment Tool
Material: Aluminium Alloy


Fitment: Universal
Length of Sleeve Anchor: Approx. 5.48cm/2.2in
Length of Pillar Sleeve: Approx. 12.96cm/5.1in
How to Use:
Step 1: Place the clutch plate above the pressure plate on the workbench, insert the tool into the center and push it down.
Step 2: Compress the small wheel to expand the caliper in the clutch plate.
Step 3: Squeeze the funnel wheel until it touches the pressure plate and rotate the two pressure plates.
Step 4: Align the two plates by sliding sideways until the two edges are parallel, and then tighten the funnel shaft to fix the two plates together.
Step 5: Install both boards on the flywheel, then loosen the small wheel to remove the tool.

Package List:
2 x Sleeve Anchor
1 x Pillar Sleeve