Feature:

• Liftgate Release Switch releases the liftgate latch to allow the tailgate to be opened.
• Easy to install and use, direct replacement the old or broken one,saving you time and effort.
• If the connector is a bit larger than the old one, the connector will need to be shaved off.
• Please allow slight dimension difference due to different manual measurement.
• Please make sure your car model and OE number before purchasing.
• This is a non-OEM product,accessory only.

Specification:

• Condition:New
• Type:Liftgate Trunk Open Release Switch w/Intelligent Key
• Color: Black
• Material:Plastic
• Dimension:6.7x2x1.2cm/2.63x0.78x0.47(L*W*H)
• Plug Size:19x12x6mm/0.75x0.47x0.23((L*W*H)
• Pin Number:4
• Fitment Type:Direct Replacement
• Placement on Vehicle: Rear
• Interchange Part Number:25380-3JA0A,253803JA0A

Package include:

• 1x Tailgate Release Switch

Fitment

• for Nissan Pathfinder Platinum S SL SV 3.5L V6 - Gas 2020
• for Nissan Pathfinder Platinum S SL SV 3.5L V6 - Gas 2019
• for Nissan Pathfinder Platinum S SL SV 3.5L V6 - Gas 2018
• for Nissan Pathfinder Platinum S SL SV 3.5L V6 - Gas 2017
• for Nissan Pathfinder Platinum S SL SV 3.5L V6 - Gas 2016
• for Nissan Pathfinder Platinum Platinum Hybrid S SL SL Hybrid SV SV Hybrid 2.5L L4 - Electric/Gas 3.5L V6 - Gas 2015
• for Nissan Pathfinder Platinum Platinum Hybrid S SL SL Hybrid SV SV Hybrid 2.5L L4 - Electric/Gas 3.5L V6 - Gas 2014
• for Nissan Pathfinder Platinum S SL SV 3.5L V6 - Gas 2013
• (Not fit for VQ35DD engine model)

Installation:

• 1. Disconnect the negative battery cable.
• 2. Remove the following parts.
• a. Liftgate upper trim.
• b. Liftgate side trim.
• c. Liftgate lower trim.
• d. Liftgate latch and lock actuator.
• 3. Disconnect the connector.
• 4. Pull out the retainer in the direction of the arrow.
• 5. Remove the liftgate opener switch.
• 6. Install in the reverse order of removal.