Feature
●The water dam is made of soft silicone material, corrosion resistant, high temperature resistant, wear resistant , does t hurt your feet.The water stopper is very easy to clean and maintain, just wipe it with a damp cloth.
●Size : 0.47 inch (H) x 0.79 inch (W),its a low water dam, can be as a shower threshold for frame-less shower door,prevent water leakage from the bottom of the door,realize the separation of wet and dry in the bathroom.
●Suitable for gaps between windowsills, stoves, countertops, bathtubs and walls, avoiding stains and debris in gaps. Provide a good protection for the bathroom, the kitchen and the bedroom environment.
●It can also be used as a door seal to keep your kitchen and bedroom dry and dust-proof. Can work on flat and angled curbs or shower door bottom to assist water back into shower.
●Clean and dry the surface,cut to the length you need,peel the self-adhesive strip on the bottom, press to the surface, the edges of the water retaining strip must be sealed with silicone sealant.In the corner, we recommend that you cut it to 45 degrees, and then connect the two parts.(For better stickiness, heat up the tape with hair dryer)
[3m & 118 inch Clear]
Description
Name: Silicone Shower Threshold Water Strip Dam
Size:
Length: 39 inch, 78 inch ... 393 inch
Color: Black, Clear, Gray, White
Material: Silicone
Package Includes：
1 x Shower barrier water stopper
Installation method:
1. Thoroughly clean the surface of the installation site and keep it dry. ( This is very important)
2. Determine the installation location and mark it with a pen.
3. Use a sharp knife to cut out the required length. (Please note that the pre-cut or trim length of the dam cannot be returned)
4.Tear off the outer skin of the tape, and then place it to the marked position and gently press it. If the weather is relatively cold, you can use a hairdryer to heat the tape to obtain better adhesion.
5. Fill the gap with sealed silicone, And remove the excess silica gel, leaving a smooth filling line.
6. The sealing silica gel needs to dry after 24 hours, so it is not allowed to move or touch water within 24 hours.