Feature

●Allow the pump to work for a few minutes after installation. Check if the startup is normal, but the idle time should not be too long in 5 seconds to prevent reducing the service life of the ceramic bearing.
●Before installing the pump, it should be ensured that there is no slag in the pipeline, as impurities, welding slag, dirt, etc. will damage the life of the pump.
●When running for the first time, pay attention to the exhaust of the pump, and the air in the pump cannot be pressurized. When the hot water circulates for a week, you can vent it once.
●This product uses a unique design of the motor and pump body structure, it has charateristics such as lower power consumption, longer life.
●Widely used in farming (lawn and garden), tour vehicles, special vehicle, ship, beverage, vehicle cleaning, carpet cleaning, ground cleaning, water purification and water treatment equipment.


Description

Product name: hot water pump
V: 220-240V/50HZ
Power: 100W
Maximum flow: 50L/MIN
Max head: 6M
Diameter: 25MM
Mobility: 0-110 degrees
The pump head is made of 100% stainless steel, which is resistant to high temperature and oxidation.
Package Contents: 1 Water Pump, 2 Brass Sockets
Note:
Please check the model of your refrigerator before purchasing to ensure ordering the correct compatible part.
Since the size above is measured by hand, the size of the actual item you received could be slight different from the size above.