Specification
Product Model: AT-30
Controller Model: AT-86
Color: Gold
Power: 3000W
Voltage: 220-240V
Frequency: 50-60Hz
Current: 25A
AdjustableTemperature Range: 35-55 ° C/95-131 ° F
Timing Range: 0.5-12hours
Assembly Required: Yes
Mount Type: Wall-mounted
Suitable Area: ≤3m3 /105ft3
Waterproof Grade: IPX4
Phase: 2
Gross Weight: 8.1kg/17.86lbs
Product Size: 35 * 18 * 24cm/13.78 * 7.09 * 9.45inch
Package Size: 41.5*21*35cm/16.34*8.27*13.78inch
Package Included
1* Steam Bath Spa Generator
1* Controller
1* Control Line
1* Temperature Probe
1* English Manual
Other Accessories for Installation
Notes
1.Please read the operating manual completely before use. And pay particular attention to the safety instructions included.
2.For comfort, the steam nozzle should be 30mm/11.81inch from the ground or 20mm/7.87inch from the edge of the bathtub. The nozzle should be as far away from the seating area as possible.
3.The steam generator and controller must be installed externally.
4.During installation, one probe of the temperature probe must be installed on the steam chamber probe, and another temperature probe head with a sensor should be installed on a vertical surface 4-5"above the ground and should be exposed to the air.
5.Before purchasing, please carefully determine the size of the room and whether the voltage wire can withstand the power of the product.
6.The machine shall be wall-mounted, and the wiring shall be connected to an independent special line. Please do not connect it to the plug.
7.Please ensure that the voltage difference between LI (L) and L2 (N) is 200-240V.
8.Please note that this product is not intended for space heating purposes.
9.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order.