Feature

●100% Metal
●Imported
●【Prodict Material】C/ Steel
●Made Of Commercial-strength Cas/t Steel With Hardened Steel Pi/vot Pin And Jack Screw. Enables Non-destructive Disassembly And Assembly And Uncontrolled Movement Of The Piston Rings.
●This Scissors-type Tool Can Be Used In The S/hop Regularly And Perfectly Tie Rod Ends And Lower Ball Joints Without Damaging The Grease Boots.
●If You Have Any Problem About The Installation Of Products , Please Consult Our Customer Service Personnel To Help You Solve It
●Universal For Most Cars And Light Trucks.

[18*6.5*5.5CM Silver]

Description

Slip the forked end between the boot and metal attachment point, make sure that the piv/ot finger is perpendicular to the threaded end, and then tighten the until there is enough resistance; H/it the connection point and/or finger with a hammer, tighten some more, and then h/it again; when the stud is loose, the tool will be loosened immediately.